Product Introduction

This instrument uses Pitot tube parallel sampling method to collect particulate matter from fixed pollution source exhaust, and uses filtration weighing method to determine mass. It can be applied to the determination of emission concentration, converted concentration, and total emission of particulate matter from various fixed pollution sources such as boilers, flues, and industrial furnaces. Automatic measurement of flue gas dynamic pressure, static pressure, atmospheric pressure, temperature, moisture content, pressure and temperature before the flowmeter O₂The SO₂、 CO、 NO、NO₂、 CO₂Parameters such as concentration and constant suction flow rate.

Reference standards

HJ/T 48-1999 Technical Conditions for Smoke and Dust Samplers

JJG 680-2007 "Verification Regulations for Smoke and Dust Samplers"

JJG 968-2002 "Verification Regulations for Smoke Analyzer"

HJ/T 397-2007 Technical Specification for Fixed Source Waste Gas Monitoring

HJ 57-2017 "Determination of Sulfur Dioxide in Fixed Source Waste Gas by Potentiometric Electrolysis Method"

HJ 836-2017 "Determination of Low Concentration Particulate Matter in Fixed Source Waste Gas by Weight Method"

GB/T 16157-1996 "Sampling Method for Particulate and Gaseous Pollutants in Exhaust from Fixed Pollution Sources"

Product Features

Integrated measurement: Equipped with a standard working condition measuring instrument, it realizes the integrated measurement of moisture content, smoke temperature, and flow rate using the resistance capacitance method, and can work independently.

Automatic drainage: Equipped with a unique and efficient air-water separator design, no longer using silicone particles, physical dehumidification, and automatic drainage.

Artificial Intelligence Operating System: A brand new operating system with user-friendly operation, beginner mode, one click start, data memory, automatic positioning and parameter reading, meeting the functional requirements of more than 50 environmental parameter measurements.

Large high brightness and high-resolution color screen: adopting an 8-inch high brightness color display screen with a resolution of 800 * 600, displaying richer content; 900 lumens of contrast, the screen can still be seen clearly under sunlight; A highly sensitive resistive touch screen that can be operated directly.

Highlight advantages

Comprehensively complete the testing of particulate matter and multi-component flue gas components from exhaust gas pollution sources (which can measure smoke, exhaust gas, and oil fume).

The instrument adopts a one master multiple slave CPU design, and the smoke and gas systems do not interfere with each other, truly achieving the simultaneous collection of smoke and gas.

New generation sensors: using the latest imported 5 series sensors, with higher measurement accuracy and stability, and longer service life; The sensor measurement adopts constant temperature control to ensure normal operation below zero degrees; Independent sensor data module, users can replace sensors without calibration, plug and play. Resolve the calibration issue of returning the host to the factory and replacing the sensor in the later stage.

Built in safety module battery: a self-developed module battery that uses backup batteries to achieve long-term power supply in situations without power supply; The internal battery uses imported standard 18650 Panasonic cells with high safety level. The circuit integrates multiple protections such as overvoltage, overcurrent, overtemperature, overcharge, overdischarge, short circuit, etc. to ensure the safety of battery use.

High load, low-noise sampling pump, with strong carrying capacity, suitable for sampling occasions with high flow rates, high temperature resistance, acid resistance, and long service life.

The outer packaging is made of aviation carbon fiber material, which has extremely high impact resistance and is lightweight; The packaging impact of 30g for 6ms and the working impact of 5g for 11ms did not cause any damage to the shell.

Industrial grade connector, one click quick plugging and unplugging aviation plug, ensuring reliable connection.

Exquisite and portable, the host weighs 9kg (without battery) with a battery of about 10kg, including a water removal device.

Design a visual dust filter element that is easy to replace and effectively filters out particulate matter, further protecting the air path and sampling pump.

Equipped with smoke and dust airtightness detection function, convenient for users to use.

Equipped with fault self detection function, it can detect the main components, main functions and faults, facilitating user maintenance and use.

It has anti backflow function, which can prevent the smoke and dust collected in the filter from being sucked out after the sampling is completed.

The intelligent software calibration function can quickly and accurately calibrate the instrument.

Standard configuration

Optional configuration