The EM600RC power intelligent monitoring instrument is equipped with a high-precision integrator, which can be directly connected to the Roche coil. Suitable for the intelligent transformation of medium and low voltage systems (6-35kV and 0.4kV), it has powerful data acquisition, processing, statistics and control functions, and can realize the measurement and calculation of basic single circuit AC parameters, energy accumulation, pulse input accumulation, fault recording, harmonic monitoring, switch input monitoring, relay output control, energy pulse output, DC transmission output, over limit alarm and other functions. EM600RC has RS485 interface, MODBUS-RTU communication protocol, and can be connected to computer monitoring systems.
function type |
Function Introduction |
monitor function |
Three phase voltage and average value Three phase line voltage and average value Three phase current, zero sequence current Three phase active, reactive, and apparent power Three-phase power factor, system power factor Voltage and current imbalance Frequency Effective value of fundamental wave of voltage and current |
STATISTICS |
2-31st harmonic components of voltage and current Odd, even, and total harmonic distortion rates of voltage and current Electric parameter over limit alarm Statistics and occurrence time of extreme values of electrical parameters Maximum demand for total active and reactive power in both directionsAnd the time of occurrence k-factor |
Electricity measurement accumulation function |
Absolute values of three-phase active and reactive power measurement Positive and negative total active and reactive electricity measurement Four quadrant reactive power measurement Time division multiple rate electricity measurement statistics (4 rates, 48 time periods) |
communication |
RS485 communication interface |
Input/output function |
4-channel switch input 2-channel relay output 1 channel 4-20mA DC transmission output (or 1 channel power pulse output) |
External dimensions (unit: mm)