EPOCH 600 ultrasonic flaw detector

☆ Measurement range: 1mm to 10160mm

☆ Operating frequency: 635 m/s to 15240 m/s

☆ Detection accuracy: 0.2 MHz to 26.5 MHz

☆ Indication error: 0.01mm

Product Introduction

----------------------------------------------------------------------

EPOCH 600Ultrasonic flaw detector

EPOCH 600Ultrasonic flaw detectorIt is an intermediate level handheld ultrasonic flaw detector.EPOCH 600Only heavy1.68Kilogram（3.72The body is wide and narrow in both horizontal and vertical directions, and the chassis is sturdy and durable, capable of working normally in extremely harsh testing environments.EN12668-1The number of instruments has increased400 V PerfectSquareAdjustable square wave pulse generator and digital filtering performance for enhancing signal-to-noise ratio.

EPOCH 600The digital ultrasonic flaw detector willOlympusThe conventional flaw detection performance of the leading industry and the efficient operation of the compact and intuitive instrument body are integrated together.EPOCH 600The flaw detector uses efficient menu functions and shortcut keys to access parameters, providing inspectors with a high-quality defect detection platform that is extremely easy to operate.

Widescreen, full screenVGAThe transparent and reflective display, as well as the digital high dynamic range receiver awaiting patent approval, enable the instrument screen to display stable and clear images under any lighting conditionsAScan the image.EPOCH 600The instrument has two hardware configurations for adjusting parameters: one is a rotating shuttle, and the other is a browsing area located on the keypad.EPOCH 600The design conforms toEN12668-1Standard requirements, with all standard and optional defect detection capabilities. This instrument, due to its sturdy, durable, and ergonomic design, can be used in almost any testing environment, while its flexibilityPerfectSquarePulse generators and digital filtering capabilities can be used for almost any detection application.

Main characteristics

l Design conforms toEN12668-1requirement.

l PerfectSquareAdjustable square wave pulse generator.

l Digital high dynamic range receiver.

l 8A digital filter can enhance the signal-to-noise ratio.

l 2 kHz PRFUsed for quick scanning.

l Rotate shuttle or browse key area for adjusting configuration.

l Wide screen and full screen that can be read under sunlightVGADisplay.

l The battery has a long working time and supports lithium-ion or alkaline batteries.

l Standard DynamicsDAC/TVG, as well as onboardDGS/AVG.

l 2 GB microSDMemory card, used for data transmission and storage.

l USB（OTG）Port, used for communication withPCMachine communication and direct printing.

l Alarm andVGAOutput.

l Optional analog output.EPOCH 600

Simple and compact, of superior quality

EPOCH 600The type of instrument has both the high efficiency of basic flaw detectors andOlympusThe superior quality of the most powerful fully digital ultrasound instrument. This compact, portable, and easy-to-use instrument is equipped with various dynamic and reliable detection functions. Given the optimized balance of the instrument's features, any level of operator can use this powerful ultrasonic flaw detector.

Easy to operate, sturdy and durable

EPOCH 600The purpose of setting up this type of instrument is to provide high-level flaw detection performance through simple basic instruments.EPOCH 600The design of this type of instrument meets the requirements of ergonomics, and is intuitive and practical. Both experienced and novice industry inspectors are suitable for using this flaw detector.

Intuitive user interface

EPOCH 600The user interface of the instrument is based on industry validatedEPOCH 1000Series flaw detectors. This instrument uses a simple menu structure for instrument settings, calibration, and software function adjustmentsEPOCHThe iconic shortcut keys of the brand instrument can access key detection functions such as gain, gate adjustment, screen freezing, and file saving.EPOCH 600The user interface of the instrument provides multiple text versions, which can be used by operators of any level.

Compact and portable, suitable for all detection environments

EPOCH 600Ultrasonic flaw detectors can be used in almost all testing environments, including testing operations on laboratory workbenches and extremely harsh and dangerous field engineering inspections.EPOCH 600The hardware configuration of the rotating shuttle of the instrument conforms toIP66Requirement: The hardware configuration of the browsing keypad meets the requirementsIP67In addition, the instrument has passed extremely strict environmental and reliability standards testing. Operators will have full confidence in the performance and durability of this instrument when using it in any testing environment. This instrument has passed tests for anti vibration, anti impact, and use in explosive atmospheres and a wide temperature range. becauseEPOCH 600The battery working time of the instrument can exceed12As a result, it has become an ideal solution for remote detection.

Bright FullVGAdisplay

EPOCH 600The instrument has fullVGA（640 X 480Display with pixel resolution.EPOCH 600The horizontally wide and vertically narrow panel design of the instrument optimizes the size and clarity of A-scan images appearing on high-quality display screens. This instrument uses transparent and reflective technology, using strong backlighting in low light indoor environments and ambient light, also known as false backlighting, in direct sunlight. Under any lighting conditions, the instrumentVGAThe screen can display extremely clear images.

Provide comfortable browsing options

EPOCH 600Ultrasonic flaw detectors have high-quality ultrasonic performance.EPOCH 600Ultrasonic flaw detector based on andEPOCH XT、LTCandEPOCH 1000The same digital structure of the series of instruments provides flexible and powerful pulse generation and reception performance, thus meeting the requirements of most defect detection applications.

Pulse generator/receiver

EPOCH 600The standard configuration of ultrasonic flaw detectors has powerful defect detection performance, such as:

l PerfectSquareAdjustable square wave pulse generator.

l Digital high dynamic range receiver.

l 8individual100%Digital filter settings.

l It can be done automatically or manually10 Hz～2000 HzAdjustment within the rangePRF.

l The voltage range of the pulse generator is100 V～400 V.

l The amplitude resolution is ±0.25%.

l 5A customized digital measurement.

Convenient browsing method

In order to meet the needs and preferences of different users,EPOCH 600The ultrasonic flaw detector is equipped with two hardware configurations: one is a rotating shuttle for adjustment, and the other is a browsing key area on the keyboard. The arrow keys on the spinning shuttle and browsing key area are used for parameter adjustment and parameter value switching.

Rotating shuttle

EPOCH 600The rotating shuttle of the ultrasonic flaw detector can be used together with the confirm button and return button to make rough and fine adjustments to the parameter values. During the detection process, the operator can lock the rotating shuttle to avoid accidental modification of parameter values. This hardware configuration can quickly switch parameter values, meeting the requirements of users who prefer to use shuttle to adjust parameters. The design of the rotating shuttle configuration conforms toIP66requirement.

Browse key area

EPOCH 600The browsing key area of the ultrasonic flaw detector isEPOCHThe iconic feature of the flaw detector. The up and down arrow keys in the browsing keypad are used for rough adjustment of parameters, while the left and right arrow keys are used for fine adjustment of parameters. The browsing keypad also includes several other functions and commonly used parameters, such as gain, save, confirm, and return keys. The design of the hardware configuration of the browsing keypad conforms toIP67The requirements.

Portable, sturdy, and ergonomically compliant

Appearance characteristics

EPOCH 600Ultrasonic flaw detector is a lightweight and easy to carry flaw detector, and its sturdy and flexible characteristics make it suitable for almost all testing environments. Some of the appearance features of this instrument are as follows:

l Widescreen, full screenVGAResolution and transparency display enable bright and clear images to be displayed in both indoor lighting and direct sunlight.

l The instrument's4Each corner is equipped with a protective sleeve made of rubber outer film, which plays a role in preventing impact and wear.

l 4The position for tying the chest strap.

l Battery compartment and side panels that can be opened without the need for toolsI/OCover up.

l A bracket used to securely place instruments, with a right angled hook that can be used for0Degree to180Change the upright angle between degrees.

l The side of the instrument is used for sealingUSB OTGCover with sealing gasket for interface and mobile storage card interface.

l Standard built-in rechargeable lithium-ion battery.

l standardAAThe alkaline battery pack improves the portability of the instrument.

l Lightweight and ergonomically designed, it increases the portability and ease of use of the instrument.

Standard configuration

l EPOCH 600Digital ultrasonic flaw detector,ACPower operation or battery operation.

l Charger/ACAdapter（100 VAC、115 VAC、230 VAC，50 Hzor60 Hz）

l Rechargeable lithium-ion battery

l Alkaline battery box

l Storage and transportation container

l Basic Operation User Manual

l Easy Beginner's Manual

l Comprehensive operation manual with comprehensive information（CD）

l One year limited guarantee

Appearance characteristics (rear panel)

Overview of Corrosion Modules

EPOCH 600The instrument includes a special application function called the corrosion module. This feature is designed specifically for operators who require both defect detection and corrosion measurement solutions as standard equipment configurations. This optional software simplifies the operation of the instrument during the corrosion application process: reducing setup time and enabling more efficient data collection. This corrosion module is used toEPOCH 600The instrument maintains its standard flaw detector features while adding many industry-leading corrosion detection capabilities to the instrument. These corrosion detection performances are all achieved through specialized corrosion thickness gauges (such as:Olympus 38DL PLUS）Improved performance. This combination of flaw detection and corrosion thickness measurement not only greatly reduces the training requirements for operators, but also enhances the widely popularEPOCH 600The general performance of the instrument.

The purpose of developing corrosion module functionality is to provide a quick and convenient solution for operators conducting basic corrosion testing. This feature is compatible with multiple industry-leadingOlympusDual crystal probe compatible, includingD790Probe. After selecting the appropriate probe, the corrosion module will affect the pulse generator/Intelligent adjustments are made to the receiver settings to ensure optimal results for ultrasonic testing. It can automatically adjust the measurement threshold and gain, allowing operators to immediately obtain thickness measurement readings with minimal manual adjustment of settings. After using this function, the operator no longer needs to continuously adjust the start, width, and level of the gate as before to maintain measurement stability and avoid interference echoes from geometric shapes.EPOCH 600The corrosion module function can also (conveniently) perform echo to echo measurements.

characteristic

The corrosion module has many features that are similar to those of a dedicated corrosion thickness gauge. These features that ensure efficient and accurate detection are as follows:

l Based on probe selection for pulse generator/Automatic setting of receiver

l Automatic zero position function for probe wear compensation（Do-Zero）

l VSound path correction

l Measurement algorithm of thickness gauge

l Single echo measurement or echo to echo measurement

l Noise blank and transverse wave echo for accurate measurement

The corrosion module also has various types of corrosion data logger files, including2DGrid files and sequence files. The color coded grid view can also provide real-time visual analysis of the thinning trend of material thickness in the detection area. The color encoding of this raster view can be up to3Display a user-defined thickness range.

The corrosion module also includes a time controlBScan the view. thisBThe acquisition of scanning is based on a single echo or from echo to echo measurement.BScanning can be up to3The user-defined thickness range displays color coding.BScanning is used to quickly collect data from potential defect areas and produce comprehensive reports.

---

technical specifications

General specifications
External dimensions (width)xhighxThick)	236millimeterx167millimeterx70millimeter
weight	1.68Kilograms, including lithium-ion batteries.
Keypad Text	English, international symbols, Japanese, Chinese.
language	English, Spanish, French, German, Japanese, Chinese.
Probe interface	BNCInterface, orNo. 1 LEMOInterface.
data storage	airborne50000individualIDEncoding, pluggable2 GB MicroSDCard (standard).
Battery type	Single lithium-ion battery, rechargeable, standard type.
Battery power supply time	12reach13Hours (lithium-ion battery),3Hour (alkaline battery).
Power requirements	ACMain power supply:100 VAC～120 VAC、200 VAC～240 VAC，50 Hz～60 Hz.
Display type	wholeVGA（640 x 480Pixel Translucent ColorLCD，60 HzUpdate rate.
Display screen size (width)xHigh, diagonal)	117millimeterX 89Millimeters,146Millimeters.
Pulse generator
Pulse generator	Adjustable square wave
PRF	10 Hz～2000 HzThe increment is10 Hz.
Energy setting	100 V、200 V、300 Vor400 V.
pulse width	25 ns～5000 ns（0.1 MHz）Adjustable, utilizingPerfectSquareTechnology.
damping	50、100、200、400 Ω.
receiver
gain	0～110 dB.
Maximum input signal	20 V P-P.
Receiver input impedance	400 Ω ±5%.
Receiver bandwidth	0.2 MHz～26.5 MHz，-3 dB.
Digital filter setting	8Standard digital filter settings:0.2～10 MHz、2.0～21.5 MHz、8.0-26.5 MHz、0.5～4 MHz、0.2～1.2 MHz、1.5～8.5 MHz、5～15 MHz、DC-10 MHz.
detection	Full wave, positive half wave, negative half wave, radio frequency wave.
Horizontal linearity	±0.5% FSW.
Vertical Linear	0.25 % FSHThe amplifier accuracy is ±1 dB.
inhibition	0～80%Full screen height with visual warning.
Wave amplitude measurement	0～110%Full screen height, resolution of0.25%.
Measurement rate	In all modes, it is equivalent toPRF.
calibration
Automatic calibration	Sound velocity and zero offset.
Vertical sound beam	(First bottom echo, or echo to echo),
Angle sound beam	(Sound path or depth).
Detection mode	Pulse echo, twin crystal or penetration.
Company	Millimeters, inches, microseconds.
Range	1Millimeters~10160Millimeters.
sound velocity	635 m/s～15240 m/s.
Zero offset	0 µs～750 µs
Display delay	-59Millimeters~25400Millimeters.
Refraction angle	0°～85°, increment is0.1°.
sluice gate
Measure the gate	2A completely independent gate for wave amplitude and transit time（TOF）Measurement.
Gate starting point	Variable within the entire display range.
Gate width	Variable within the range from the starting point of the gate to the display endpoint.
Gate height	stay2%～95%Variable within the full screen height range.
call the police	Positive and negative thresholds, minimum depth (gate)1And the gate2）.
measure
Measurement display position	5Position (manually or automatically selected).
sluice gate1	Thickness, sound path, projection, depth, wave amplitude, transit time, minimum/Maximum depth, minimum/Maximum wave amplitude.
sluice gate2	With the gate1Same.
Echo to echo	Standard gate2To the gate1.
Other measurements	DGS/AVGThe upward momentum value（dB）TheDGS/AVGofERS(Equivalent to the size of a reflector)AWS D1.1/D1.5Grade classification（DValue and inhibition value.
DAC/TVGstandard
DACspot	Up to50A point,110 dBDynamic range.
Surface correction	Standard outer diameter or bar calibration for angle beam measurement.
Instrument input/output
USBport	USB（OTG）Port
RS-232port	have
Video output	standardVGAOutput.
Analog output	1Analog output (optional), optional1 V/10 VFull scale, maximum4 mA.
Digital output	3An alarm output,5V TTL，10 mA.
Environmental rating
IPgrade	according toIEC 60529-2004(Shell protection level)- IPStandard: The hardware design of the browsing key area complies with the standardIP67Intrusion protection standards, high-speed rotation hardware design meetsIP66Intrusion protection standards. Before the newly developed product is officially put into production,Olympus NDTInternal inspection of product design is required. This instrument has been tested and proven to comply withIPRating criteria.
Explosive atmosphere	By US military standardsMIL-STD-810Fmethod511.4programIThe tests specified in the regulations can be carried out in accordance with the standards of the National Fire Protection Association（NFPA 70）500sectionIlevel2subsectionDSafe operation in explosive atmosphere defined within the group.
Anti impact test	Passed the US military standardsMIL-STD-810Fmethod516.5programIThe tests specified in the regulations, for each axis6One cycle,15g，11 msHalf string wave.
Anti vibration test	By US military standardsMIL-STD-810Fmethod514.5programIappendixCchart6Testing in the middle, generally exposed: each axis1Hour.
working temperature	-10 °～50°C
Battery storage temperature	0 °～50°
Corrosion module
Available probes	D790 (5MHz)、D798 (7.5MHz)
Maximum thickness range	254Millimeter（10Inches)@ 5900rice/Second（0.2320inch/Microseconds)
Thickness range (steel)	D790：1.00reach254Millimeter（0.040reach10Inches) D798：0.71reach100Millimeter（0.028reach4Inches)
Gain adjustment	Automatic gain control（AGC）Or manual gain control（0 –110 dB）

EPOCH 600Ultrasonic flaw detectorIt is an intermediate level handheld ultrasonic flaw detector.EPOCH 600Only heavy1.68Kilogram（3.72The body is wide and narrow in both horizontal and vertical directions, and the chassis is sturdy and durable, capable of working normally in extremely harsh testing environments.EN12668-1The number of instruments has increased400 V PerfectSquareAdjustable square wave pulse generator and digital filtering performance for enhancing signal-to-noise ratio.

EPOCH 600The digital ultrasonic flaw detector willOlympusThe conventional flaw detection performance of the leading industry and the efficient operation of the compact and intuitive instrument body are integrated together.EPOCH 600The flaw detector uses efficient menu functions and shortcut keys to access parameters, providing inspectors with a high-quality defect detection platform that is extremely easy to operate.

Widescreen, full screenVGAThe transparent and reflective display, as well as the digital high dynamic range receiver awaiting patent approval, enable the instrument screen to display stable and clear images under any lighting conditionsAScan the image.EPOCH 600The instrument has two hardware configurations for adjusting parameters: one is a rotating shuttle, and the other is a browsing area located on the keypad.EPOCH 600The design conforms toEN12668-1Standard requirements, with all standard and optional defect detection capabilities. This instrument, due to its sturdy, durable, and ergonomic design, can be used in almost any testing environment, while its flexibilityPerfectSquarePulse generators and digital filtering capabilities can be used for almost any detection application.

Main characteristics

l Design conforms toEN12668-1requirement.

l PerfectSquareAdjustable square wave pulse generator.

l Digital high dynamic range receiver.

l 8A digital filter can enhance the signal-to-noise ratio.

l 2 kHz PRFUsed for quick scanning.

l Rotate shuttle or browse key area for adjusting configuration.

l Wide screen and full screen that can be read under sunlightVGADisplay.

l The battery has a long working time and supports lithium-ion or alkaline batteries.

l Standard DynamicsDAC/TVG, as well as onboardDGS/AVG.

l 2 GB microSDMemory card, used for data transmission and storage.

l USB（OTG）Port, used for communication withPCMachine communication and direct printing.

l Alarm andVGAOutput.

l Optional analog output.EPOCH 600

Simple and compact, of superior quality

EPOCH 600The type of instrument has both the high efficiency of basic flaw detectors andOlympusThe superior quality of the most powerful fully digital ultrasound instrument. This compact, portable, and easy-to-use instrument is equipped with various dynamic and reliable detection functions. Given the optimized balance of the instrument's features, any level of operator can use this powerful ultrasonic flaw detector.

Easy to operate, sturdy and durable

EPOCH 600The purpose of setting up this type of instrument is to provide high-level flaw detection performance through simple basic instruments.EPOCH 600The design of this type of instrument meets the requirements of ergonomics, and is intuitive and practical. Both experienced and novice industry inspectors are suitable for using this flaw detector.

Intuitive user interface

EPOCH 600The user interface of the instrument is based on industry validatedEPOCH 1000Series flaw detectors. This instrument uses a simple menu structure for instrument settings, calibration, and software function adjustmentsEPOCHThe iconic shortcut keys of the brand instrument can access key detection functions such as gain, gate adjustment, screen freezing, and file saving.EPOCH 600The user interface of the instrument provides multiple text versions, which can be used by operators of any level.

Compact and portable, suitable for all detection environments

EPOCH 600Ultrasonic flaw detectors can be used in almost all testing environments, including testing operations on laboratory workbenches and extremely harsh and dangerous field engineering inspections.EPOCH 600The hardware configuration of the rotating shuttle of the instrument conforms toIP66Requirement: The hardware configuration of the browsing keypad meets the requirementsIP67In addition, the instrument has passed extremely strict environmental and reliability standards testing. Operators will have full confidence in the performance and durability of this instrument when using it in any testing environment. This instrument has passed tests for anti vibration, anti impact, and use in explosive atmospheres and a wide temperature range. becauseEPOCH 600The battery working time of the instrument can exceed12As a result, it has become an ideal solution for remote detection.

Bright FullVGAdisplay

EPOCH 600The instrument has fullVGA（640 X 480Display with pixel resolution.EPOCH 600The horizontally wide and vertically narrow panel design of the instrument optimizes the size and clarity of A-scan images appearing on high-quality display screens. This instrument uses transparent and reflective technology, using strong backlighting in low light indoor environments and ambient light, also known as false backlighting, in direct sunlight. Under any lighting conditions, the instrumentVGAThe screen can display extremely clear images.

Provide comfortable browsing options

EPOCH 600Ultrasonic flaw detectors have high-quality ultrasonic performance.EPOCH 600Ultrasonic flaw detector based on andEPOCH XT、LTCandEPOCH 1000The same digital structure of the series of instruments provides flexible and powerful pulse generation and reception performance, thus meeting the requirements of most defect detection applications.

Pulse generator/receiver

EPOCH 600The standard configuration of ultrasonic flaw detectors has powerful defect detection performance, such as:

l PerfectSquareAdjustable square wave pulse generator.

l Digital high dynamic range receiver.

l 8individual100%Digital filter settings.

l It can be done automatically or manually10 Hz～2000 HzAdjustment within the rangePRF.

l The voltage range of the pulse generator is100 V～400 V.

l The amplitude resolution is ±0.25%.

l 5A customized digital measurement.

Convenient browsing method

In order to meet the needs and preferences of different users,EPOCH 600The ultrasonic flaw detector is equipped with two hardware configurations: one is a rotating shuttle for adjustment, and the other is a browsing key area on the keyboard. The arrow keys on the spinning shuttle and browsing key area are used for parameter adjustment and parameter value switching.

Rotating shuttle

EPOCH 600The rotating shuttle of the ultrasonic flaw detector can be used together with the confirm button and return button to make rough and fine adjustments to the parameter values. During the detection process, the operator can lock the rotating shuttle to avoid accidental modification of parameter values. This hardware configuration can quickly switch parameter values, meeting the requirements of users who prefer to use shuttle to adjust parameters. The design of the rotating shuttle configuration conforms toIP66requirement.

Browse key area

EPOCH 600The browsing key area of the ultrasonic flaw detector isEPOCHThe iconic feature of the flaw detector. The up and down arrow keys in the browsing keypad are used for rough adjustment of parameters, while the left and right arrow keys are used for fine adjustment of parameters. The browsing keypad also includes several other functions and commonly used parameters, such as gain, save, confirm, and return keys. The design of the hardware configuration of the browsing keypad conforms toIP67The requirements.

Portable, sturdy, and ergonomically compliant

Appearance characteristics

EPOCH 600Ultrasonic flaw detector is a lightweight and easy to carry flaw detector, and its sturdy and flexible characteristics make it suitable for almost all testing environments. Some of the appearance features of this instrument are as follows:

l Widescreen, full screenVGAResolution and transparency display enable bright and clear images to be displayed in both indoor lighting and direct sunlight.

l The instrument's4Each corner is equipped with a protective sleeve made of rubber outer film, which plays a role in preventing impact and wear.

l 4The position for tying the chest strap.

l Battery compartment and side panels that can be opened without the need for toolsI/OCover up.

l A bracket used to securely place instruments, with a right angled hook that can be used for0Degree to180Change the upright angle between degrees.

l The side of the instrument is used for sealingUSB OTGCover with sealing gasket for interface and mobile storage card interface.

l Standard built-in rechargeable lithium-ion battery.

l standardAAThe alkaline battery pack improves the portability of the instrument.

l Lightweight and ergonomically designed, it increases the portability and ease of use of the instrument.

Standard configuration

l EPOCH 600Digital ultrasonic flaw detector,ACPower operation or battery operation.

l Charger/ACAdapter（100 VAC、115 VAC、230 VAC，50 Hzor60 Hz）

l Rechargeable lithium-ion battery

l Alkaline battery box

l Storage and transportation container

l Basic Operation User Manual

l Easy Beginner's Manual

l Comprehensive operation manual with comprehensive information（CD）

l One year limited guarantee

Appearance characteristics (rear panel)

Overview of Corrosion Modules

EPOCH 600The instrument includes a special application function called the corrosion module. This feature is designed specifically for operators who require both defect detection and corrosion measurement solutions as standard equipment configurations. This optional software simplifies the operation of the instrument during the corrosion application process: reducing setup time and enabling more efficient data collection. This corrosion module is used toEPOCH 600The instrument maintains its standard flaw detector features while adding many industry-leading corrosion detection capabilities to the instrument. These corrosion detection performances are all achieved through specialized corrosion thickness gauges (such as:Olympus 38DL PLUS）Improved performance. This combination of flaw detection and corrosion thickness measurement not only greatly reduces the training requirements for operators, but also enhances the widely popularEPOCH 600The general performance of the instrument.

The purpose of developing corrosion module functionality is to provide a quick and convenient solution for operators conducting basic corrosion testing. This feature is compatible with multiple industry-leadingOlympusDual crystal probe compatible, includingD790Probe. After selecting the appropriate probe, the corrosion module will affect the pulse generator/Intelligent adjustments are made to the receiver settings to ensure optimal results for ultrasonic testing. It can automatically adjust the measurement threshold and gain, allowing operators to immediately obtain thickness measurement readings with minimal manual adjustment of settings. After using this function, the operator no longer needs to continuously adjust the start, width, and level of the gate as before to maintain measurement stability and avoid interference echoes from geometric shapes.EPOCH 600The corrosion module function can also (conveniently) perform echo to echo measurements.

characteristic

The corrosion module has many features that are similar to those of a dedicated corrosion thickness gauge. These features that ensure efficient and accurate detection are as follows:

l Based on probe selection for pulse generator/Automatic setting of receiver

l Automatic zero position function for probe wear compensation（Do-Zero）

l VSound path correction

l Measurement algorithm of thickness gauge

l Single echo measurement or echo to echo measurement

l Noise blank and transverse wave echo for accurate measurement

The corrosion module also has various types of corrosion data logger files, including2DGrid files and sequence files. The color coded grid view can also provide real-time visual analysis of the thinning trend of material thickness in the detection area. The color encoding of this raster view can be up to3Display a user-defined thickness range.

The corrosion module also includes a time controlBScan the view. thisBThe acquisition of scanning is based on a single echo or from echo to echo measurement.BScanning can be up to3The user-defined thickness range displays color coding.BScanning is used to quickly collect data from potential defect areas and produce comprehensive reports.

---

technical specifications

General specifications
External dimensions (width)xhighxThick)	236millimeterx167millimeterx70millimeter
weight	1.68Kilograms, including lithium-ion batteries.
Keypad Text	English, international symbols, Japanese, Chinese.
language	English, Spanish, French, German, Japanese, Chinese.
Probe interface	BNCInterface, orNo. 1 LEMOInterface.
data storage	airborne50000individualIDEncoding, pluggable2 GB MicroSDCard (standard).
Battery type	Single lithium-ion battery, rechargeable, standard type.
Battery power supply time	12reach13Hours (lithium-ion battery),3Hour (alkaline battery).
Power requirements	ACMain power supply:100 VAC～120 VAC、200 VAC～240 VAC，50 Hz～60 Hz.
Display type	wholeVGA（640 x 480Pixel Translucent ColorLCD，60 HzUpdate rate.
Display screen size (width)xHigh, diagonal)	117millimeterX 89Millimeters,146Millimeters.
Pulse generator
Pulse generator	Adjustable square wave
PRF	10 Hz～2000 HzThe increment is10 Hz.
Energy setting	100 V、200 V、300 Vor400 V.
pulse width	25 ns～5000 ns（0.1 MHz）Adjustable, utilizingPerfectSquareTechnology.
damping	50、100、200、400 Ω.
receiver
gain	0～110 dB.
Maximum input signal	20 V P-P.
Receiver input impedance	400 Ω ±5%.
Receiver bandwidth	0.2 MHz～26.5 MHz，-3 dB.
Digital filter setting	8Standard digital filter settings:0.2～10 MHz、2.0～21.5 MHz、8.0-26.5 MHz、0.5～4 MHz、0.2～1.2 MHz、1.5～8.5 MHz、5～15 MHz、DC-10 MHz.
detection	Full wave, positive half wave, negative half wave, radio frequency wave.
Horizontal linearity	±0.5% FSW.
Vertical Linear	0.25 % FSHThe amplifier accuracy is ±1 dB.
inhibition	0～80%Full screen height with visual warning.
Wave amplitude measurement	0～110%Full screen height, resolution of0.25%.
Measurement rate	In all modes, it is equivalent toPRF.
calibration
Automatic calibration	Sound velocity and zero offset.
Vertical sound beam	(First bottom echo, or echo to echo),
Angle sound beam	(Sound path or depth).
Detection mode	Pulse echo, twin crystal or penetration.
Company	Millimeters, inches, microseconds.
Range	1Millimeters~10160Millimeters.
sound velocity	635 m/s～15240 m/s.
Zero offset	0 µs～750 µs
Display delay	-59Millimeters~25400Millimeters.
Refraction angle	0°～85°, increment is0.1°.
sluice gate
Measure the gate	2A completely independent gate for wave amplitude and transit time（TOF）Measurement.
Gate starting point	Variable within the entire display range.
Gate width	Variable within the range from the starting point of the gate to the display endpoint.
Gate height	stay2%～95%Variable within the full screen height range.
call the police	Positive and negative thresholds, minimum depth (gate)1And the gate2）.
measure
Measurement display position	5Position (manually or automatically selected).
sluice gate1	Thickness, sound path, projection, depth, wave amplitude, transit time, minimum/Maximum depth, minimum/Maximum wave amplitude.
sluice gate2	With the gate1Same.
Echo to echo	Standard gate2To the gate1.
Other measurements	DGS/AVGThe upward momentum value（dB）TheDGS/AVGofERS(Equivalent to the size of a reflector)AWS D1.1/D1.5Grade classification（DValue and inhibition value.
DAC/TVGstandard
DACspot	Up to50A point,110 dBDynamic range.
Surface correction	Standard outer diameter or bar calibration for angle beam measurement.
Instrument input/output
USBport	USB（OTG）Port
RS-232port	have
Video output	standardVGAOutput.
Analog output	1Analog output (optional), optional1 V/10 VFull scale, maximum4 mA.
Digital output	3An alarm output,5V TTL，10 mA.
Environmental rating
IPgrade	according toIEC 60529-2004(Shell protection level)- IPStandard: The hardware design of the browsing key area complies with the standardIP67Intrusion protection standards, high-speed rotation hardware design meetsIP66Intrusion protection standards. Before the newly developed product is officially put into production,Olympus NDTInternal inspection of product design is required. This instrument has been tested and proven to comply withIPRating criteria.
Explosive atmosphere	By US military standardsMIL-STD-810Fmethod511.4programIThe tests specified in the regulations can be carried out in accordance with the standards of the National Fire Protection Association（NFPA 70）500sectionIlevel2subsectionDSafe operation in explosive atmosphere defined within the group.
Anti impact test	Passed the US military standardsMIL-STD-810Fmethod516.5programIThe tests specified in the regulations, for each axis6One cycle,15g，11 msHalf string wave.
Anti vibration test	By US military standardsMIL-STD-810Fmethod514.5programIappendixCchart6Testing in the middle, generally exposed: each axis1Hour.
working temperature	-10 °～50°C
Battery storage temperature	0 °～50°
Corrosion module
Available probes	D790 (5MHz)、D798 (7.5MHz)
Maximum thickness range	254Millimeter（10Inches)@ 5900rice/Second（0.2320inch/Microseconds)
Thickness range (steel)	D790：1.00reach254Millimeter（0.040reach10Inches) D798：0.71reach100Millimeter（0.028reach4Inches)
Gain adjustment	Automatic gain control（AGC）Or manual gain control（0 –110 dB）