Beijing Ligotai Technology Co., Ltd
Home>Products>ES-2 Conductivity Sensor
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
  • Address
    22F, Block A, Chengming Building, No. 2 Xizhimen South Street, Xicheng District, Beijing
Contact Now
ES-2 Conductivity Sensor
ES-2 Conductivity Sensor
Product details

The ES-2 conductivity sensor is used for continuous monitoring of electrical conductivity (EC) in pipelines or containers, and can directly measure the conductivity of narrow pore water by immersing the sensing head in water. Connect ZL6 data acquisition to view sensor data anywhere through the Internet.
The ES-2 conductivity sensor is designed specifically for measuring the conductivity of water in pipelines and containers. If ES-2 is combined with TEROS 12 or 5TE for soil monitoring, a complete understanding of soil salt transport can be obtained.

TECHNICAL INDEX

range Conductivity: 0 ~ 120 dS/m;
Temperature:- 40 ~ 60℃
resolution Conductivity: 0.001 dS/m;
Temperature: 0.1℃
accuracy Conductivity:±0.01 dS/m or±10% (whichever is greater);
Temperature:±1℃
operation temperature -40 ~ 60℃
size

Length 10.9 cm; Width 2.4cm; Cable: 1/2 inch NPT cable

Time

Typical: 25ms; Maximum: 50ms

output

DDI serial port or SDI-12

interface type 3.5mm stereo plug, or tinned bare wire (3)
Power supply (VCC to GND) Minimum 3.6, maximum 15 VDC
Digital input voltage (logic high)

Minimum 2.8V, typical 3.6V, maximum 5.0V

Digital input voltage (logic low)

Minimum -0.3V, typical 0.0V, maximum 0.8V

Digital output voltage (logic high) Typical: 3.6V
Power line conversion rate Minimum 1.0 V/ms
Current consumption (during measurement)

Measurement period: minimum 20 mA, typical 20 mA, maximum 28 mA; During the testing period: Typical 0.03mA

Start Time

DDI serial port: maximum 100ms; SDI-12: Minimum 100ms, typical 200ms, maximum 250ms

Cable Length Standard 5 meters (other lengths can be customized, up to a maximum of 75 meters)
Support data collection (purchased separately)

METER ZL6 series data acquisition, or data acquisition that provides 3.6-15.0VDC excitation voltage and supports SDI-12 communication

Following standards

Produced under ISO 9001:2015 standard

EM ISO/IEC 17050:2010 (CE marking)



Origin and Manufacturer: United StatesMETERCompany(Former Decagon)


Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!