EVCounter

542Series - Used for Multi Gauge Systems

characteristic

•One device can connect up to6A micrometer.

•RSThe connection function can connect up to10platformEVCounter to a personal computer, thus forming a maximum of60A multi-point measurement system with a micrometer.

•Output modes include those used for tolerance judgmentI/OOutput and segmented output,BCDData output andRS-232Output.

•Peak holding measurements can include maximum value, minimum value, and overflow (TIR), among others.

•It is possible to perform calculations such as summation, mean, maximum, minimum, and maximum difference for micrometers connected to the same device.

function

GO/±NGJudgment GO/±NGSignal output, maximum/minimum/TIR（Overflow measurement, counter direction conversion, metric/imperial conversion, sum between specified axes, mean, maximum, minimum, and maximum difference calculation, and output mode selection

output

I/O:Conventional operation output and GO/±NGSignal (3)Segment), measurement data (BCD code) or 21 segment segmented output (optional) RS232C: Multiple measurement data

External control

I/O:Axis selection, pre adjustment, data retention, and error clearing

RS-232C:Display value output command, maximum/minimum/TIRConversion and peak clearing, zeroing, preset value input, tolerance value input, error clearing, and specified inter axis calculation value output commands

RSlink

Through an RS-232CThe port can connect up to 10 EV counters (circular connection). EV and EF counters can be mixed and connected (up to 6 counters can be connected)

Error display/output

Power supply voltage error, overspeed error, overflow error, micrometer error, communication error, and tolerance setting error

Maximum input frequency

1. 25MHz(Differential Square WaveMaximum counting speed: 5MHz

Power Supply

Wiring port (M3)Screw), DC+12-+24V, 700mA (maximum)

Ordering Information

EV counter size: