Shandong Xinhai Mining Technology Equipment Co., Ltd
Home>Products>Eccentrically arranged rotating magnetic field dry sorting machine
Eccentrically arranged rotating magnetic field dry sorting machine
A patented dry magnetic separator independently developed by Xinhai.
Product details
Advantages and Characteristics

Working principle

Technical Parameter

success cases

Related products

Advantages and Characteristics

1. This dry magnetic separator can quickly induce magnetic flipping and agitation of minerals, achieving efficient separation of magnetic minerals and non (weak) magnetic minerals with low mineral loss rate;

2. Compared with conventional magnetic drum and conventional dry separator, this dry magnetic separator can effectively solve the problems of eddy current heating, easy ore sticking, and difficult ore unloading.

3. In the case where the tailings grade of magnetic drum or conventional dry beneficiation machine is equivalent or even lower, for different properties of rich magnetite, by adjusting the corresponding technical parameters and structures, it is possible to throw about 10-30% more tailings than conventional magnetic drum or conventional dry beneficiation machine, and increase the grade of dry beneficiation concentrate by about 1.0% -8.7% more than conventional magnetic drum or conventional dry beneficiation machine; In the case of fine crushing to below 2mm and coarse embedding particle size, qualified concentrate with a grade of over 60% can be directly obtained;

4. Magnetic wrap is made of non-magnetic stainless steel to ensure that the magnet does not come off;

5. The sorting cylinder is wrapped with wear-resistant rubber, which significantly improves its service life.

Application conditions

1. Used for dry pre selection of lean magnetite before grinding, with particle sizes below 30mm selected. The finer the particle size, the better the selection effect. Usually, a large amount of tailings can be discarded to significantly improve the grinding grade.

鑫海干式磁选机设备结构原理图 2. Used for dry pre selection of rich magnetite ore before grinding, with particle sizes below 30mm selected. The finer the particle size, the better the selection effect. Usually, a moderate amount of tailings can be discarded to increase the grinding grade to above the geological grade.

3. Dry select and recover previously lost magnetite from abandoned tailings.

4. Used for dry selection and recycling of ferromagnetic materials from waste such as steel slag.

Working principle Process diagram of eccentric arrangement rotating magnetic field dry sorting machine There is no belt on the outer surface of the sorting cylinder of Xinhai Strong Magnetic Dry Magnetic Separation Machine, which can correspondingly increase the magnetic field strength of the sorting cylinder in the selected area. The rotating magnetic system is installed inside the sorting cylinder, and the fixed magnetic system is installed inside the unloading cylinder. The rotation direction of the sorting cylinder is the same as that of the unloading cylinder, while the rotation direction of the sorting cylinder is opposite to that of the rotating magnetic system. In the sorting area of the strong magnetic dry magnetic separator, the magnetic minerals mixed between non-magnetic minerals are subjected to much less centrifugal force and gravity than the magnetic force. Under the strong adsorption of magnetic force and the combined action of magnetic flipping and magnetic stirring, the magnetic minerals will gradually move towards the inner layer. When the magnetic minerals rotate with the sorting cylinder to the unloading area, due to the eccentric arrangement of the rotating magnetic system, the magnetic field strength of the unloading area of the sorting cylinder is weak, and most of the magnetic minerals can automatically fall off. The small amount of magnetic minerals that have not fallen off are adsorbed to the outer surface of the unloading cylinder with higher magnetic field strength when they rotate near the unloading cylinder, thus achieving automatic unloading of magnetic minerals. Technical Parameter
Specification and model 600 800 800
CTXG-0606 600 1200 1800
CTXG-0812 CTXG-0818 Cylinder diameter (mm) Cylinder length (mm)
Tube surface field strength (mT) -30 -30 -30
300~500 300~500 300~500 Feed particle size (mm)
Feed water content ≤5% ≤5% ≤5%
Processing capacity (t/h) ≤35 ≤100 ≤150
Motor power (KW) 2.9 5.8 7.9
5.5×2
11×2
11×2 Total weight (t) Dimensions (mm)
Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!