VIP member
Electronic component gas capture device
Electronic component gas capture device
Product details
Product Introduction
Equipped with 4 heating furnaces capable of holding 6 samples, each operating independently.
The blowing gas supply for 24 samples can be set arbitrarily.
The heating temperature of each furnace can be set from room temperature to 200 ℃ (with a maximum temperature of 260 ℃)
The heating time of each heating furnace can be set using a timer.
The sample tube is treated with an inert coating.
The built-in water-cooled valve can easily adjust the temperature of the heating furnace.
The blowing gas supply for 24 samples can be set arbitrarily.
The heating temperature of each furnace can be set from room temperature to 200 ℃ (with a maximum temperature of 260 ℃)
The heating time of each heating furnace can be set using a timer.
The sample tube is treated with an inert coating.
The built-in water-cooled valve can easily adjust the temperature of the heating furnace.
Technical Parameter
Number of sample tubes | 24 of them |
Sample tube material
|
Stainless steel (inner surface gold-plated)
|
Sample tube size
|
φ30×40mm(30ml)
|
Heating furnace material
|
aluminum
|
Heating method of heating furnace
|
Resistance heating method
|
Heating furnace heating temperature
|
Room temperature~200 ℃
|
Type of blowing air
|
Commonly used helium or nitrogen gas
|
Purge gas flow rate
|
20~200ml/min
|
Circulating water-cooled valve group
|
Using tap water for circulating water cooling
|
Circulating water cooling piping purging
|
Air or nitrogen
|
Size of sample heating device
|
950(W)×620(H)×400(D)mm
|
weight
|
120Kg
|
power supply
|
200V/15A, 50/60Hz
|
Standard attachments:
|
|
Piping components
|
1 set
|
Water cooling circulation valve group
|
1 set
|
power line
|
1 set
|
sample tube
|
24 pieces
|
Sample dish
|
24 of them
|
Primary adsorption tube interface
|
24 of them
|
Sealing gasket
|
24 sets
|
tool
|
1 set
|
Operating Instructions
|
1 volume
|
Online inquiry