Electronic plug gauge | DIATEST plug gauge measuring head-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

13962107506
Address

Room B-401, Chengjian Building, 185 Jumao Road, Xiangcheng District, Suzhou

Contact Now

Electronic plug gauge | DIATEST plug gauge measuring head

Contact Supplier

More Products

Product details

German DIATEST company BMD high-precisionPlug gaugetypeMeasuring headEspecially suitable for automatic and manual production in large quantitiesmeasureIts unique guiding cylinder design ensuresmeasureThe reliability of the results solved the aperture issuemeasureThe central challenge,

Product Description

The plug gauge measurement system (BMD) is a high-precision measuring instrument with automatic display and automatic centering functions. This plug gauge measurement system is easy to use and suitable for both static and dynamic measurements. By manual measurement, the size deviation and shape error of the hole can be detected, and it can also be installed on measuring equipment for automatic detection.

This measurement system has the advantages of wide application range, simple operation, high accuracy, and sturdy structure. There are many basic models to choose from in standard products, and accessories that meet specific measurement ranges are provided to ensure that most apertures encountered in practical applications can be measured. The display part of the measuring instrument can be a mechanical meter, a digital display meter, or a sensor connected to the analysis equipment. Use a calibration ring gauge for zero calibration.

Product Features

Quickly measure aperture, roundness, and ellipticity
Especially suitable for manual and automatic measurement of high tolerance grade parts produced in large quantities
Automatic centering, no need to search for inflection points inside the hole during measurement
Ideal choice for reading and subsequent analysis of measurement results using a digital display meter
The measuring head consists of a hard chrome plated cylindrical guide body and carbon steel measuring points
The carbon steel measuring needle transfers the radial movement distance of the measuring point 1:1 to the display table
The built-in elastomer provides continuous force measurement, thus eliminating human factors
The measuring instrument is a modular system consisting of a measuring head, handle, depth extension rod, limit block, and right angle attachment, with a wide range of applications

Plug gauge measurement system (BMD)

Ten thousand meters

-The measurement system has 7 display positions
-Measurement data is transmitted wirelessly, ensuring high security
-Resolution: 0.0001mm
-Measurement stroke: 4mm, accuracy up to 0.0002mm
-Programmable on the measuring instrument
-Programming or data transmission can also be done through cables
-Can perform static or dynamic measurements (maximum value/minimum value/deviation value)
-Measurable inner and outer diameters
-Tolerance colors (red/green/yellow) can be switched on in all measurement modes
-Conversion from metric to imperial system
-The measurement results can be transmitted through RS232 or USB interface
-One receiving device can connect up to 120 measuring instruments
-Without replacing the battery, the usage time can reach 4000 hours or transmit 2 million data
-Measurements can be taken within a range of 200m
-The protection level is IP65
-Free measurement data receiving software provided
-The connecting thread is M6x0,75 or M10x1
-The angle of the BMD probe can be adjusted arbitrarily

Wireless Transmission Ten Thousand Meter

technical parameter

·Scope of application: through-hole, blind hole, tapered hole, stepped hole, square hole, etc

·Measurement range: Ф2.25 -Ф270mm：

·Measurement depth: 0.6-2000mm

·Repetition accuracy: ≤ 1μm

·Linear error: ≤ 1％

·Service life: Meet the measurement requirements of over 1 million times

The plug gauge probe can measure the aperture of the following shapes:

孔径形状

Common measuring heads


Standard probe		Through-hole probe			Blind hole probe
Order number	Measurement range (mm)	Order number		measuring range	Order number	measuring range
010101	Ф2.98-9.0	010201		Ф2.98-9.0	010301	Ф7.0-16.0
010102	Ф7.0-20.0	010202		Ф7.0-20.0	010302	Ф15.0-150
010103	Ф15.0-270	010203		Ф15.0-270

Standard measuring head with blowing groove		Measuring head with blowing groove and through-hole			Blind hole probe with blowing groove
Order number	Measurement range (mm)	Order number		measuring range	Order number	measuring range
010401	Ф7.9-20	010501		Ф7.9-20	010601	Ф7.0-16
010402	Ф15-270	010502		Ф15-270	010602	Ф15-150

Small hole standard probe		Small hole blind hole probe			Parallel slot width measuring head
Order number	Measurement range (mm)	Order number	Measurement range (mm)		Order number	measuring range
010701	Ф2.25-2.50	010801	Ф2.25-2.50		010901	‖1.0-3.0
010702	Ф2.50-2.98	010802	Ф2.50-2.98		010902	‖3.0-4.9
					010903	‖4.9-30

Sectional schematic diagram

1. Display Table 2 Insulated handle 3 Measuring needle 4 Cylindrical guide body 5 Elastic body 6 Measuring head

Special probe

Special measuring head for gear width
	This probe is specifically designed for measuring crankshafts Distance F between the connecting rod bearing surface on the camshaft
Thin walled hole probe

Special shaped aperture probe	Special parallel groove probe

Multi section probe

Extended probe for guiding body	Conical hole measuring head	Three-point probe
Measurement range: Ф3.95-270mm Please indicate L1 when placing an order, L2 L4 is a constant value	Measurement range: 4-100mm Maximum angle: ∠ Approximately 308	Three point probe used for measuring polygonal holes The shape error is due to the special design of the structure, The accuracy of the three-point probe is lower than that of the two-point probe
Step hole probe	Equipped with two guide groove probes	Groove probe

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content