Electroplating acid mist purification towerAlso known as acid gas purification tower, acid mist purification tower, acid mist absorption tower, waste gas purification tower, and fiberglass acid mist purification tower, it plays a role in removing harmful gases from waste gas and has the characteristics of wide applicability, high purification efficiency, low equipment resistance, and small footprint.

Instructions for use of electroplating acid mist purification tower:

1. When installing the acid mist purification tower, users need to build a concrete foundation at a height of more than 150mm above the ground, and the water pump and fan should have separate concrete foundations as required.

2. Attention should be paid to the protection of the product during transportation and installation, and the body and components should not be damaged.

3. When the purification tower leaves the factory, we will use segmented packaging and transportation according to the specific situation, and have Tianqing Environmental Protection's technical personnel install and debug it on site.

4. If the acid mist purification tower is to be used outdoors, anti freezing measures should be taken at the bottom water pool of the tower body in winter.

5. There is a liquid level mark on the bottom pool of this device. Before use, be sure to inject the absorption solution according to the liquid level mark. Attention should be paid to replenishing absorbent solution during use.

6. When using, the purification tower should first turn on the circulating water pump for 2-3 minutes before starting the blower. When stopping, the blower should be stopped for 1-2 minutes before stopping the circulating water pump.

7. Regularly check the acidity depth of the liquid in the bottom water tank of the tower and the degree of gas purification at the exhaust outlet according to the usage situation. If it exceeds the standard. The absorbent in the bottom pool should be replaced.

8. Please note that the user service should conduct a maintenance check on the filling of the disc-shaped spray pipe and packing after one and a half to two years of use, and clean them according to the instructions.

Application case of electroplating acid mist purification tower:

The following is the purification equipment installed by Huakang Environmental Protection for the hardware factory.