Endoscope washing and disinfection pure water equipment

The purified water system in the endoscopy room complies with the GB30689-2014 water standard. The quality of the produced water fully complies with the WS310.1-2009 supply room water standard; Meets hygiene standards

Application scope: Medical device cleaning, supply room water, electronics, fine chemicals, etc

The purified water system in the endoscopy room meets the water standard of GB30689-2014 for "Sanitary Requirements for Endoscopic Automatic Cleaning and Disinfection Machines".

Purified water meets the requirements of GB5749, with a total bacterial count of ≤ 10CFU/100ml; The filter element used in pure water equipment has a pore size of ≤ 0.2 μ m and should be replaced regularly.

Process Flow of Henan Wanda Environmental Protection Purified Water Equipment
1. Chlorination: In order to reduce microorganisms in raw water, chlorine is usually added as a biocide.
2. Condensation and clarification: In order to turn suspended solids and other impurities into large sediment particles and settle them as soon as possible, an appropriate amount of coagulant can be added to the raw water container, which can achieve good results. The processing objects of agglomeration are fine particle suspensions and colloids.
3. Multi media filtration: Different particle sizes of quartz sand are used and placed in ascending order from bottom to top. For raw water with high iron and manganese content, manganese sand is used as filter material. When the raw water passes through the filter material, most of the suspended solids are adsorbed by the filter material. At the same time, the thin film formed on the surface of the filter material increases the flow resistance, thereby enhancing the filtration accuracy.
4. Deep filtration: Using wound honeycomb filter and sintered filter for deep filtration, it can intercept particles larger than 1 μ m, effectively remove gelatinous and suspended solids, and has iron removal effect.
5. Adsorption: Adsorption is a method of using porous solid substances to remove one or more harmful substances from water by adsorbing them onto the surface of the solid. The objects removed by adsorption method include organic matter, colloids, microorganisms, free chlorine, odors, and pigments. The commonly used adsorbents are activated carbon or macroporous adsorption resin.
6. Softening treatment: Softening usually uses two methods: one is to add chemicals to convert calcium and magnesium into salts with low solubility and remove them; The second method is to use ion exchange resin to release sodium ions and replace them with calcium and magnesium ions in water, thereby converting calcium and magnesium salts into sodium salts and achieving the purpose of softening water.

Product parameters of pure water equipment for endoscope cleaning and disinfection
1. Conductivity: 2-10 μ S/cm (25 ℃)
2. PH value: 6.5-9
3. Water temperature: 5-35 ℃
4. Total hardness:< 0.5ppm
5. Organic compounds:< 0.5 ppm, TOC is zero
6. Oxide: ≤ 0.05ppm
7. Iron and manganese:< 0.01ppm
8. Silicon dioxide:< 0.05 ppm
9. Carbon dioxide:< 5ppm

Quality of Wanda Environmental Protection Water Treatment Equipment

Henan Wanda Environmental Protection Water Treatment Equipment has obtained water related approval certification, and the quality of the produced water meets the national standard for purified water; PLC touch screen control, high degree of automation, simple operation; Modular production, convenient maintenance and replacement of consumables; Southern stainless steel pump operates stably; Reasonable process design, higher output, higher equipment recovery rate, water and electricity savings, energy consumption savings of 25%; The wiring of the control cabinet is neat and simple, and the labeling of wire numbers is more convenient for searching; Using components from well-known manufacturers, finely crafted and highly practical; Welding of 304 stainless steel plate for longer practical life; Centralized equipment design and small footprint; Modular production and manufacturing make it easier to repair and replace faulty accessories and consumables, resulting in higher efficiency; Adopting single-sided welding and double-sided forming welding technology, the inner surface is smooth to prevent the growth of microorganisms in hygiene blind spots.

Wanda Environmental Protection Water Treatment Equipment Manufacturer Qualification

Henan Wanda Environmental Protection has been focusing on high-end water treatment system solutions for 13 years, with over 20000 successful cases; We have passed the national high-tech enterprise certification, the product has passed the health and water related product safety certification, the technology type eagle enterprise certification, the ISO9001-2008 quality management system certification, and the ISO14001-2004 environmental management system certification, OHSASI8001: 2007 Occupational Health Management System Certification.

Wanda Environmental Protection Water Treatment Equipment After sales Service

Selected well-known manufacturers and component suppliers in the industry, modular production of products, easier and more efficient maintenance and replacement of parts and consumables after failure; Adequate inventory, fault response within 2 hours, fault diagnosis within 6 hours, repair plan issued within 12 hours, extended warranty period, establishment of long-term customer after-sales records, worry free after-sales service.