VIP member
FDL series paint oven
The FDL series meets all the requirements and standards for processing solvent based materials under EN1539, and fully complies with ISO3215. It provi
Product details
FDL series/safe paint oven
The FDL series meets all the requirements and standards for processing solvent based materials under EN1539, and fully complies with ISO3215. It provides reproducible results and precise limits on non-volatile components under symmetrical airflow at specified flow rates. In short: Made of silicone resin, dust-free interior, and an efficient replaceable filter, it provides the perfect environment for treating paint surfaces.
• Performance characteristics and equipment
-Electronic control APT.line® Internal preheating technology
-Complies with the safety requirements of EN1539:210-08
-Temperature range: from 5 ° C above ambient temperature to 300 ° C
-MS controller with LCD display and integrated timer from 0 to 99 hours
-Timer function of the controller: delayed on, delayed off, delayed off depending on temperature
-Adjustable thermal load (0 to 100%)
-Single slope function
-Fluororubber gasket for doors (maximum operating temperature of 200 ° C)
-Removable fresh air filter, M6 grade (EU6 particulate filter, used for filtering particles with a diameter of 1μmand101μmParticles between them)
-Independent adjustable temperature safety device, level 2 (DIN12880) equipped with sound and light alarm
-Fresh air monitoring, equipped with sound alarm and automatic heating cut-off function
-Rear exhaust duct, diameter 16mm
-Used for APT COM® The Data Control SystemRS422 printer and communication interface
-2 chrome plated shelves
Technical specifications of FDL series
Dimensions |
|
Width (millimeters) |
830 |
Height (including footrest and casters) (millimeters) |
805 |
Depth (mm) (plus door handle 50mm) (mm) |
685 |
Distance between the rear and the wall (in millimeters) |
100 |
Distance between side and wall (mm) |
160 |
Outer diameter of exhaust duct (mm) |
100 |
Steam space volume (liters) |
156 |
Internal dimensions |
|
Width (millimeters) |
600 |
Height (millimeters) |
435 |
Depth (millimeters) |
435 |
Internal volume (liters) |
115 |
Chrome plated shelves (standard quantity/maximum quantity) |
2/5 |
Load per shelf (kg) |
30 |
Allowable total load (kg) |
60 |
Weight (empty container) (kg) |
90 |
temperature data |
|
Temperature range: 10 ° C to (° C) above ambient temperature |
300 |
When the temperature deviation is+150 ° C（±°C） |
2.5 |
Temperature fluctuation range（±k） |
0.8 |
Heating time+150 ° C (minutes) |
20 |
The recovery time for opening the door for 30 seconds is 150 ° C (minutes) |
12 |
Air circulation (approximately/time/minute) |
20 |
Exhaust volume {ca. L/min} at a temperature of 50 ° C |
400 |
Electronic data |
|
Protection level of enclosure in accordance with EN60529 standard |
IP33 |
Nominal voltage（±10%) 50/60 Hz (V) |
230 |
Nominal power (watts) |
2900 |
Energy consumption+150 ° C (Wh/h) |
1200 |
All technical data is only applicable to22±3 ° C ambient temperature and±Standard specification unloaded equipment with 10% power supply voltage fluctuation, temperature data determined according to BINDER factory standards and DIN12880:2007, and adapted to the recommended wall gap of 10% of the internal chamber height, width, and depth. For the series of devices, all data are typical averages, and technical changes are reserved.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-