VIP member
FT-300 series conductor powder resistivity tester (manual type)
FT-300 series conductor powder resistivity tester (manual type)
Product details
FT-300Series powder resistivity tester details introduction
FT-300 Series powder
resistivity tester
Overview:
1. Four terminal measurement method
2. Adopting a 4.3-inch LCD screen display
3. Display resistance value, resistivity, conductivity value, temperature, pressure value, and automatic unit conversion
4. Hydraulic power (manual)
5. Thin film button switch panel, easy to operate
6. Operations in both Chinese and English languages
Principle:
Principle:
A known amount of powder is compressed to a set pressure value or pressure under hydraulic power, and the resistance, resistivity, and conductivity of the powder are measured online, and the data is recorded
Resolve measurement errors in difficult powder compression molding or tablet extraction
Scope of application: Scope
of application
Suitable for lithium battery materials, graphene, graphite, carbon powder, coking, petrochemicals, powder metallurgy, universities, research departments, it is a tool for inspecting and analyzing the quality of conductive powder samples.
Refer to meeting the standard:
|
1. Test method for calcined petroleum coke used as carbon anode in YST 587.6-2006 Part 6 |
Measurement of powder resistivity; |
Models and indicators |
|
and indicators： |
Parameter data |
Specification and model |
|
FT-300I |
FT-300II |
1. Resistance |
|
10-7～2×107Ω |
10-6～2×106Ω |
2. Range of resistivity |
|
10-7～2×107Ω-cm |
10-6～2×106Ω-cm |
|
|
3. Conductivity |
5×10-7～107s/cm 5×10-6～106s/cm 4. Test current range |
|
|
1μA，10μA，100µA，1mA，10mA，1000mA |
5. Measure the voltage range |
Measurement voltage range: 2mV 20mV 200mV 2V
|
|
Measurement accuracy ± (0.1% reading) |
Resolution: 0.1uV 1uV 10uV 100uV |
|
|
6. Current accuracy |
±0.1% |
|
|
±0.2% |
7. Resistance accuracy |
|
|
≤ 0.3% standard resistance |
8. Display reading |
|
|
LCD display: resistance value, resistivity, conductivity value, temperature, pressure value, automatic unit conversion, cross-section, height, upper and lower limit alarms9. Testing method |
Four terminal measurement method |
|
|
10. Height range and accuracy Height measurement to percentile range: 0.01-10.01mm, measurement resolution 0.01mm 11. Pressure range
|
choose and buy a.200kg； b.300kg； c.500kg； d.1000kg 12. Powder measuring device Optional If not available, the standard mold has an inner diameter of 10mm When ordering models with pressures of 200kg and 300kg, the mold can be selected with one of the following specifications:; |
|
|
a. Mold inner diameter 10mm; The mold has a stroke height of 25mm; |
b. Mold inner diameter 16-16.3 mm; The mold has a stroke height of 25mm; |
|
|
c. Mold inner diameter 30mm; The mold has a stroke height of 25mm; |
d. Customization of other specifications 2. Pressure method: manual pressure measurement |
|
|
13. Working power supply |
Input: AC 220V ± 10%, 50Hz power consumption:< 30W |
|
|
14. External dimensionsHost Mainframe: Approximately L330mm * D350mm * H120mm |
Manual device: approximately H450mm * L200mm * D120mm |
|
15. Net weight
About 35kg
16. Standard configuration
choose and buy
a. 1-5 standard calibration resistors; b. A set of PC software; c. Computers and printers are configured according to customer requirements; d. 1 measurement certificate, e. 1 height calibration plug gauge
Steps and processes
1. Clear the running height to zero
2. Load the weighed sample into the mold cavity
3. Secure the electrode knob
4. Set the parameters on the monitor
5. Achieve the set pressure or pressure value
6. Read the compression height data of the sample and input it
7. Obtain resistance, resistivity, and conductivity data
8. Record data
9. Sample demolding
7. Test completed
Advantages description:
1. Cost effective models The data is stable
2. Can read powder height data
3. PC software can be selected for purchase
4. Electrical resistivity measurement system
5. Configure a powder waste collection tray
6. Easy to operate Automatically calculate the required data
7. Obtain data on resistance, resistivity, conductivity, height, diameter, pressure, etc. after compaction
Whole machine schematic diagram
The operation interface displays:
Partial customer cases:
Institute of Process Engineering, Chinese Academy of Sciences
hebei university of engineering
Wenzhou University
Tianjin University
Gaoque Co., Ltd
Fujian Xinsen Carbon Industry Co., Ltd
Dongguan University of Technology
Beijing United Coating Technology Co., Ltd
Duofuduo New Energy Technology Co., Ltd
Tianyuan Xiwang (Shenzhen) New Energy Materials Technology Co., Ltd
Beijing Institute of Technology
yangzhou university
Guangxi University
Shenzhen National Innovation Energy Research Institute
Lianyungang Zhengdao New Energy Co., Ltd
Wuhan University School of Chemistry
Shanghai Jiaotong University
University of Electronic Science and technology
Shandong Lianke New Materials Co., Ltd
Heilongjiang Tianlin Technology Co., Ltd
Xi'an Jiaotong University
Changzhou 2D Carbon Technology Co., Ltd
Guangzhou Institute of Energy, Chinese Academy of Sciences
Wuhan Youzhuo Technology Co., Ltd
1.Shenzhen Sno Industrial Development Co., LtdExtreme Resources Technology Co., Ltd
2.Hubei Zechuan Technology Co., Ltd
Guizhou Anda Technology Energy Co., Ltd
3.Service Items
Warranty:
4.12 months, long-term maintenance
Training: Operation Training:
5.Telephone teaching; USB teaching files; Remote visual communication; On site teaching; Instruction manual and teaching documents
Maintenance and upkeep:
Provide knowledge maintenance and maintenance documents, labels, forms, and maintenance reminders
Verification file:
3Q verification documents, measurement certificates
Extended Services:
Extended warranty service, sample testing service, extended service, instrument rental service
Common supporting solutions for powder industry machines:
one
Common instrument solutions in the powder industry:
Moisture meter, loose density meter, angle of repose tester, powder flowability tester
Screening particle size analyzer, compaction density analyzer, electrostatic charge tester, bulk density analyzer
Ruike shares:ROOKO
Ruike brand
-----Focusing on powders
&
New Material Measurement and Analysis Instrument Solution
---
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-