VIP member
Product details
Product Introduction
The FP-9000 flat panel gas capture device is developed specifically for capturing volatile gases (organic pollutants) generated on the surface of LCD liquid crystal displays and PDP plasma displays.
The heating furnace base is equipped with a fixed flat plate device, which can reliably capture and analyze the flat plate gas.
The heating furnace can be heated up to 500 ℃ for capturing and sampling.
The heating furnace adopts an inverted hanging method, only sampling the front of the flat plate, and will not cause damage to the flat plate.
The heating furnace is sealed with an O-ring (polyimide material) for no leakage.
Equipped with a cooling water circulation device.
Equipped with anti overheating devices, interlocking safety devices, emergency stop buttons, water leakage sensors (optional) and other safety prevention devices.
The heating furnace base is equipped with a fixed flat plate device, which can reliably capture and analyze the flat plate gas.
The heating furnace can be heated up to 500 ℃ for capturing and sampling.
The heating furnace adopts an inverted hanging method, only sampling the front of the flat plate, and will not cause damage to the flat plate.
The heating furnace is sealed with an O-ring (polyimide material) for no leakage.
Equipped with a cooling water circulation device.
Equipped with anti overheating devices, interlocking safety devices, emergency stop buttons, water leakage sensors (optional) and other safety prevention devices.
Technical Parameter
|
way
|
Hanging method
|
|
Capture LCD screen size
|
Below 200mm in diameter
|
|
O ring
|
Sealing part diameter 220mm (polyimide)
|
|
Quartz heating furnace
|
Transparent quartz material
|
|
Heating method of heating furnace
|
Independent heating method for top and bottom plates
|
|
Heating furnace operating temperature
|
Commonly used 400 ℃ (up to 500 ℃)
|
|
Heating furnace cooling
|
Cooling water circulation device
|
|
Thermal insulation pipe
|
Inert coating treatment on the inner surface
|
|
purge gas
|
Usually nitrogen is used, with a maximum flow rate of 500ml/min
|
|
Anti overheating device
|
Current 15A, induced current 30mA
|
|
EMERGENCY STOP
|
Red, mushroom shaped
|
|
Safety device
|
Interlocking structure
|
|
Way of Pressure
|
motor drive
|
|
Equipment size
|
1140(W)×1106(H)×750(D)mm
|
|
weight
|
280Kg
|
|
power supply
|
Single phase AC200V, 15A · AC100V, 20A
|
|
Standard attachments:
|
|
|
PAT (primary adsorption tube):
|
2 (not compatible with other companies' capture pipes)
|
|
PAT rack
|
1 (not compatible with capture pipes from other companies)
|
|
PAT adapter
|
1 (to be used in conjunction with capture pipes from other companies)
|
|
O ring
|
2 of them
|
|
Cooling water circulation device
|
1 unit (with standard piping)
|
|
Thermal insulation pipe
|
1 unit
|
|
gas pipe
|
1 set (1/16 "-1/8")
|
|
cable
|
1 set
|
|
tool
|
1 set
|
|
Operating Instructions
|
1 volume
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-