After years of development, the company has been able to produce various series of crushing equipment with wide applications, such as wood fiber processing equipment, calcium carbonate modification equipment, and so on.

Product Description of Flour Precision Processing Equipment

In addition to the impact crushing function, this machine also has the functions of spraying high-speed vortices and ultrasonic impact. The high-speed airflow generated can also take away the heat generated during crushing, avoiding local overheating and suitable for crushing various special materials and thermosensitive materials. This type of machine has the special function of simultaneous drying and crushing operation as long as hot air is introduced. Therefore, it not only has high crushing efficiency and fine powder, but also can process tough, fibrous, and wet materials with high moisture content that are difficult for general micro powder machines to crush. Its powder crushing rotor consists of several horizontal disks and vertical blades, forming many staggered crushing chambers. The air inside the chamber is elastic and can freely vibrate. When the rotor is working, it can generate jets and eddies, causing materials to rub and collide with each other and break into fine powder. There is also an overflow pipe above the fuselage, and unqualified particles can be returned for re crushing to ensure the fineness requirements of the product.

Product Description: The internal cavity of the body is cylindrical, divided into upper and lower parts by a ring. The lower part is the intake chamber, and the upper part is divided into a crushing chamber and a grading chamber by a diversion ring. The crushing chamber is composed of a crushing disc and a liner, used to crush materials into fine powder. The grading chamber is composed of grading impellers, which can divide fine powder into two specifications: standard particle size and non standard particle size. Standard particles are sucked out through the discharge pipe and collected by the cyclone collector. Unqualified products fall back to the crushing chamber along the inner wall of the diversion ring and continue to be crushed until they meet the standard.

The speed of the graded impeller can be adjusted to regulate the particle size of the product. The feeding screw device is located on the inner wall of the machine body and is used to feed materials into the crushing chamber. Its speed can also be adjusted to control different feeding amounts