Fully automatic closed flash point testersummary

The TW-2016BS fully automatic closed flash point tester is a high-tech product independently developed with domestic standards. The instrument adopts closed-loop control technology to achieve good control of the heating rate; Adopting air cooling device for rapid cooling and temperature reduction; Adopting high-resolution color touch screen display; Test the over temperature alarm and automatically stop the experiment; 32-bit single-chip microcomputer automatically controls the entire process of heating, stirring, and flashing; Equipped with self checking function and data storage function; The test is completed, and the measurement results will be automatically displayed and printed. The instrument has the advantages of accurate measurement, good repeatability, stable and reliable performance, and simple operation. Widely used in departments such as power, petroleum, chemical, commercial inspection, and scientific research, it meets the requirements of ASTM D93 and GB/T 261-2008 standard methods.

Measuring instrumentInnovative Technology:

The external igniter brightness adjustment knob solves the problem of inaccurate testing caused by the aging of the igniter after long-term use.

Measuring instrumentTechnical indicators

1) Display: Color LCD monitor

2) Operation mode: touch screen

3) Measurement range: (room temperature~350) ℃

4) Temperature detection: platinum resistance

5) Resolution: 0.1 ℃

6) Repeatability: ± 1 ℃ when flash point value ≤ 110 ℃ ± 2 ℃ when flash point value>110 ℃

7) Opening time: 1.5S

8) Ignition method: Electric ignition

9) Information storage: capable of storing 1000 analysis results

10) Cooling method: forced air cooling

11) Printer: Thermal printer

12) Environmental temperature: (5-40) ℃

13) Environmental humidity: ≤ 85%

14) Power supply: AC220V ± 10% 50Hz ± 5%

15) Power: ≤ 350VA

16) Dimensions: 42 × 32 × 32 (length × width × height)