VIP member
Fully automatic vacuum forming packaging machine
Introduction: Product Introduction: Mainly used for molding various plastic products, and automatically cutting edges of different shapes of bubble ca
Product details
Product Introduction:
Mainly used for molding various plastic products and automatically cutting edges of different shapes of bubble caps or shells. Suitable for PVC double-sided vacuum sealing, vacuum sealing and paper card sealing, environmentally friendly APET film folding, soft wire indentation punching and cutting molding, special material sealing. Blister packaging (including upper and lower double bubble cover heat sealing and cutting edges, bubble cover and cardboard heat sealing and cutting edges)
Product features:
Mainly used for molding various plastic products and automatically cutting edges of different shapes of bubble caps or shells. Suitable for PVC double-sided vacuum sealing, vacuum sealing and paper card sealing, environmentally friendly APET film folding, soft wire indentation punching and cutting molding, special material sealing. Blister packaging (including upper and lower double bubble cover heat sealing and cutting edges, bubble cover and cardboard heat sealing and cutting edges)
Product features:
High Q-value electronic oscillator with stable and reliable output;
High sensitivity spark suppression, circuit prevents damage to the mold;
Rotary structure with two workstations for mold installation, effectively improving production efficiency;
Cylinder ejection positioning device, accurate positioning of turntable;
High quality imported component assembly.
Basic parameters:
Maximum power: 2.1KW
Overall dimensions: W 680mm x L 1120mm
Table height: 920mm
Foot weight: 15kg
Machine weight: 71kg
Edge sealing range: W 320mm x L 460mm
Maximum product height: 200mm
Sealing and cutting method: Bottom blade
Maximum outer diameter of film roll: DIA 250mm x W 470mm
Production: 4-6 pcs/min
Product principle:
This molding process mainly uses the vacuum suction generated by a vacuum pump to heat and soften PVC, PET, PETG, APTT, PP, PE, PS and other thermoplastic plastic sheets into various shapes of vacuum covers, vacuum trays, bubble shells, etc. through molds.
Operation method:
Product principle:
This molding process mainly uses the vacuum suction generated by a vacuum pump to heat and soften PVC, PET, PETG, APTT, PP, PE, PS and other thermoplastic plastic sheets into various shapes of vacuum covers, vacuum trays, bubble shells, etc. through molds.
Operation method:
Place the formed vacuum formed parts into the mold, then pack them with the required packaging items and cover them with paper cards.
The A-type rotating disc worktable and the B-type rotating square disc worktable (C-type, D-type, E-type, F-type sliding table worktable) are moved to the corresponding positions, triggering the travel switch. The pressure plate descends and applies pressure on its own, the AC contactor is connected, and the heating and cooling are completed for the set time, completing the sealing process. The pressure plate returns to its original position. Subsequently, the disc worktable can be rotated 120 degrees (Type B rotates the square disc worktable 180 degrees, while Type C, D, and E push and pull another slide worktable to bring the second workstation into the sealing position). Type A has three or two working positions, while Type B has two working positions (two working positions for Type C, D, and E, and one working position for Type F) that can be continuous
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-