GCJZ-8019apparatus for determining existent gum

(Three hole gasoline type for vehicles)

GCJZ-8019 Actual Gel Tester (Three Hole Gasoline Type for Vehicles) Product Introduction:

GCJZ-8019The Type Actual Gum Tester is an instrument specifically designed to determine the actual gum content in aviation gasoline and automotive gasoline. Suitable for conducting actual gel testing on aviation gasoline and automotive gasoline according to the method specified in GB/T 8019-2008 "Determination of Gel Content in Fuel - Jet Evaporation Method" (not suitable for determining the actual gel content of aviation turbine fuel).

GCJZ-8019 Actual Gel Tester (Three Hole Gasoline Type for Vehicles)Technical parameters:

1Working power supply: AC(220±10%)V、 50Hz, 3500W.

2Evaporation bath type and size: Aluminum bath block with a diameter of 260mm and a height of 130mm.

3Number of test holes: 3.

4Test hole size: Diameter 51mm x 70mm (inner diameter x depth).

5Working temperature: (160-165) ℃.

6Temperature control method: automatic temperature control.

7Temperature display: digital display.

8Flow display: displayed by a floating ball air flow meter.

9Working pressure of air pressure reducing valve: 0.035MPa (displayed on the instrument air pressure gauge, adjusted by the instrument pressure reducing valve).

10Jet nozzle outlet air flow rate: (600 ± 90) mL/s per hole at normal temperature and pressure.

11Dimensions: 590mm x 480mm x 340mm (length x width x height, excluding thermometer holder).(Note: Equipped with an air compressor)

Main features:

1、Adopting a unique heating bath design with specialized technology, the gas path inside the bath is designed reasonably, and the heating and evaporation effect is good.

2The workbench is made of stainless steel and has three test holes. The jet flow rate of each test hole is adjusted and controlled by its own independent flowmeter, which can simultaneously test three samplesHeating evaporation test.

3The instrument adopts a desktop structure, with a simple design and easy use. It is equipped with an air compressor, which fully meets the testing requirements.

4The instrument is equipped with an oil-water separator to prevent oil, gas, and water vapor from entering the interior of the instrument