GRG high-temperature resistant pipeline pumpapplication

Widely used in energy, metallurgy, chemical industry, textile, papermaking, as well as high-temperature hot water pressurized circulation transportation for boilers in hotels, bathrooms, and guesthouses, and as a pump for urban housing heating circulation, with operating temperatures below 240 ℃.

GRG high temperature resistancePipeline pumpadvantage

Smooth operation: The absolute concentricity of the GRG high-temperature resistant centrifugal pump shaft and excellent dynamic and static balance of the impeller ensure smooth operation without vibration.
Drip proof: Hard alloy seals made of different materials ensure that there is no leakage during the transportation of different media.
Low noise: The water pump supported by two low-noise bearings runs smoothly, with almost no noise except for weak motor noise.
Low failure rate: The structure is simple and reasonable, and the key parts are of world-class quality; Matching, the whole machine's fault free working time is greatly improved.
Easy maintenance: Replacing seals and bearings is simple and convenient.
More land saving: The exit can be arranged in three directions: left, right, and up, which is convenient for pipeline layout and installation, saving space.

GRG resistantHigh temperature pipeline pumpworking conditions

1. Pipeline pumpThe suction pressure is ≤ 1.6MPa, or the maximum working pressure of the pump system is ≤ 1.6MPa, that is, the pump suction inlet pressure+pump head is ≤ 1.6MPa, and the pump static pressure test pressure is 2.5MPa. Please specify the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6MPa, it should be separately stated when ordering, so that the overcurrent and connection parts of the pump can be made of cast steel materials during manufacturing.
2. Environmental temperature<40 ℃, relative humidity<95%.
3. The volume content of solid particles in the conveyed medium shall not exceed 0.1% of the unit volume, and the particle size shall be less than 0.2mm.
Note: If the medium used is with small particles, please indicate it when ordering so that the GRG type high-temperature resistant centrifugal pump manufacturer can use wear-resistant mechanical seals.

GRG high-temperature resistant pipeline pumpinternal structure

GRG high-temperature resistant pipeline pumpModel Meaning

GRG high-temperature resistant pipeline pumpmain accessories

GRG high-temperature resistant pipeline pumpModel Meaning

Please provide as much as possible for ordering:

1. Model 2. Diameter 3. Head (m) 4. Flow rate 5. Motor power (KW) 6. Speed (R/min) 7. Material without accessories 8. Voltage (V)

Welcome to visit our Quandabf Pump Valve website (www.quandabf. cn) if you have any questions You can call us and we will do our best to provide you with high-quality service.