GSZ series double cone rotary vacuum dryer-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

1318283536313357833587
Address

No. 30 Changle Road, Jing'an Economic Development Zone, Qixia District, Nanjing City

Contact Now

GSZ series double cone rotary vacuum dryer

Contact Supplier

More Products

Product details

GSZ series double cone rotary vacuum dryer

Working principle
　　SZGThe double cone rotary vacuum dryer is a double cone rotary tank body. In a vacuum state, the tank body is heated by introducing thermal oil or hot water into the jacket, and the heat contacts the wet material through the inner wall of the tank body. The water vapor or other gases evaporated from wet materials after absorbing heat are extracted through a vacuum pump and a vacuum exhaust pipe. Due to the vacuum state inside the tank and the continuous up and down, internal and external flipping of the material caused by the rotation of the tank, the drying speed of the material is accelerated, and the drying rate is increased to achieve uniform drying.

characteristic
The double cone rotary vacuum dryer is a drying equipment that integrates mixing and drying. Match the condenser, vacuum pump, and dryer together,Form a vacuum drying device.(If solvent recycling is not required,The condenser is not necessary)The internal structure of this machine is simple,Easy to clean,easy to operate,Can reduce labor intensity and improve working environment. Widely used for drying materials in industries such as pharmaceuticals, chemicals, food, dyes, etc.

Application scope
　 This machine is suitable for drying powdered, granular, and well flowing materials in industries such as medicine, food, and chemical.
The drying of flammable and explosive materials should be specified separately.
When using hot water or high-temperature heat transfer oil for heating, it should be explained before ordering. If a pressure vessel certificate is required, please indicate it separately when placing an order.
conform to“GMP”Please specify separately when requested:Direct gear transmission should be adopted, with a closed structure and a vacuum hood made of metal sintered mesh.
The materials include inner and outer stainless steel, inner wall enamel, among which stainless steel has304、321、316Choose from materials such as Hastelloy alloy.
2000It is recommended to use speed control for type and above, and to use integrated machining for the shaft center.

technical specifications

Name and Model	100	350	500		750	1000	1500	2000		3500	4500	5000
Tank capacity	100	350	500		750	1000	15000	2000		3500	4500	5000
Maximum loading capacityL	40	140	200		300	400	600	800		1400	1800	2000
Maximum loading weight(kg)	20	70	100		150	200	300	400		700	900	1000
rotational speed(rpm)	3~13						6	5		4	4	4
Motor Powerk	0.75	1.1	1.5		2.2	3	4	5.5		7.5	11	15
wcover an area	2160 mm	2160 ×800	2350 ×800		2560 ×800	×1000 1300	3060 2860×	3260 ×1300		3760 ×1400	3960 ×1800	4400 ×200
×2500Rotation height	1750	2100	2250		2490	2800	2940	2990		3490	4100	4200
mmDesign pressure inside the tank（	MPa）
-0.1～0.15Jacket design pressure	(MPa)
≤0.3	800	1100		1200	1500	2800	3300		3600	6400	7500		8600

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content