76-1 Electric Stirring Glass Thermostatic Water Bath Product Quotation
76-1 electric stirring glass constant temperature water bathProduct Overview:
Electric glass constant temperature water bath is used for constant temperature heating and other temperature tests.

76-1 electric stirring glass constant temperature water bathProduct features:
1. Transparency in the studio facilitates operators to observe the internal testing situation
2. Temperature digital display, automatic temperature control
3. Equipped with electric stirring, the water temperature rises uniformly during heating

76-1 electric stirring glass constant temperature water bathTechnical parameters:
Model: 76-1
Temperature range: Room temperature to 100 ℃
Water temperature fluctuation: ＜ 0.5℃
Heating power: 1000W
Mixing power: 60W
Mixing speed: 0-2500 revolutions per minute
Timing range: 0-120 minutes
Working hours: continuous
Power supply: 220V 50Hz
Glass cylinder size: diameter 300 * 300 mm

76-1 electric stirring glass constant temperature water bathUsage and maintenance:
3-1: Inject an appropriate amount of purified water into the studio water tank.
3-2: Insert the wires of the mixing motor and temperature sensor into the corresponding sockets.
3-3: Connect the power supply.
3-4: Select temperature.
① When the temperature "setting measurement" selection switch is turned to "setting", adjust the temperature control knob and select the desired temperature
② When the temperature "setting measurement" selection switch is turned to "measurement", the actual temperature of the working room will be displayed. (The red light on indicates heating operation)
3-5: Turn on the mixing switch and slowly adjust the mixing speed.
3-6: After completing the work, place the "temperature control knob" in the smallest position, turn off the power switch, and cut off the power
3-7: If not used for a long time, the working water tank should be drained and dried.