Introduction to Glass Crusher and Ceramic Crusher

Glass crusher (double toothed roller crusher), also known asGlass crusher, ceramic crusher, ceramic crusher
Suitable for industries such as sintered ore, coal, cement, silicate, glass, ceramics, etc., it is suitable for crushing brittle materials below medium hardness and is mainly used for fine crushing operations of ores.
Glass crusher (double toothed roller crusher), also known as 2PGC crusher, belongs to the type of double roller machine. The roller surface shape can be divided into coarse and fine toothed rollers, which can be adjusted according to the required size of the material for production. It is suitable for brittle and soft materials.

The glass crusher has the advantages of small volume, high crushing ratio (5-8), low noise, simple structure, and easy maintenance. It has high productivity (1-2 times higher than the current 2PCM toothed roller crusher in China), uniform particle size of the crushed material, low over crushing rate, easy maintenance, sensitive overload protection, safety and reliability. In addition, the ceramic crusher (double toothed roller crusher) can be equipped with coarse toothed rollers or medium toothed rollers according to the characteristics and requirements of the crushed materials.

Glass crusher and ceramic crusher pictures:

Multi angle diagram of glass crusher and ceramic crusherGlass crusher _ Ceramic crusher delivery site pictures（Click to view more pictures of the double toothed roller crusher

）	Double toothed roller crusher sent to Chizhou, Anhui	Double toothed roller and drum screen sent to Jiangsu Salt	450X500 double toothed roller crusher sent to

400 double toothed roller crusher sent to Laiwu

Glass crusher _ Ceramic crusher video:

Double toothed roller paired with roller combination for breaking glass

Glass crushers and ceramic crushers are suitable for materials:	coal	calcium oxide	Coke
calcite	quartz	Marble	Glass

Ceramics

Coal, calcium oxide, coke, calcite, quartz, marble, ceramics, etc

Glass crusher and ceramic crusher structure:
The glass crusher (double toothed roller crusher) mainly uses special wear-resistant toothed rollers for high-speed rotation to split and crush materials (traditional toothed roller crushers use low-speed extrusion crushing), forming a mechanism of high productivity.

The glass crusher (double toothed roller crusher) consists of a transmission device, a frame part, a crushing roller, a mechanical spring device, a linkage mechanism, etc.Internal structure diagram of double toothed roller crusher (different roller teeth have different applicable materials and discharge particle sizes)


click to enlarge

Splicing gear plate diagram

Overall gear roller diagram

Working principle of glass crusher and ceramic crusher

Schematic diagram of working principle of glass crusher (double toothed roller crusher)

After the material enters the crushing chamber of the machine, it is subjected to the meshing force of the rotating roller shaft, forcing it to pass between the two rollers while being squeezed and sheared by the roller shaft. The material begins to shatter, and the fragmented small particles are thrown down the machine through the gap between the two roller shafts along the tangent line of the roller rotation. Large particles exceeding the gap continue to be crushed into small particles and discharged.

18.5×24500×1900×1350

2pgc800×1050500-80030-150

100-16022×2

2550×2050×1100

2pgc900×900

600-900

30-200

150-200

22×2

2780×4100×1550