Guazi and Peanut Belt Drying Machine

Published on May 14th, 2016

Guazi and Peanut Drying Machine, Guazi and Peanut Drying Equipment, Guazi and Peanut Drying Machine, Guazi and Peanut Drying Equipment, Guazi and Peanut Belt Drying Machine. Changzhou Xinke Drying Equipment Co., Ltd. www.xkdry.com

1、 Working principle, structural characteristics, and main technical parameters

Working principle: Wet materials are added to the feeding hopper and evenly spread on the mesh belt. The materials that fall onto the mesh belt move forward at a constant speed under the drive of the transmission motor The heated hot air is blown into the interior of the drying machine by the blower and penetrates the material layer from bottom to top After the hot air comes into contact with the wet material, the temperature rapidly drops. The wet material absorbs the heat from the hot air and quickly exchanges heat and mass, transferring the internal moisture to the outside and carrying away the surface moisture with the hot air The moist air taken away is discharged outdoors by a dehumidification fan.

At the beginning of drying, there is a large temperature difference between the hot air and the wet material, which is a constant speed process. The drying speed is very fast. As the drying progresses, the moisture content in the material decreases, and the temperature difference between the hot air and the material also decreases relatively. The drying speed also slows down, and the temperature of the material gradually increases The heat provided by hot air is mainly used for four major parts: evaporating water, heating materials, equipment heat loss, and heat carried away by exhaust gas

The heater is placed inside the dryer for easier installation and maintenance

The dryer has one independent transmission motor that can be controlled by electromagnetic speed regulation, which can effectively control the feeding speed and drying time to meet the final moisture requirements of the product. There are material blocking plates on both sides of the mesh belt to prevent materials from blowing onto the track and chain. The ball bearings on the chain operate flexibly, and the forward movement of the chain relies on the rolling friction between the ball bearings and the track. There are two main shafts at both ends of the material inlet and outlet, and the main chain wheel is fixed at both ends of the main shaft, running synchronously with the chain during operation

The bottom 10 channel steel of the host box is welded to the surrounding skeleton 5 square tubes as a whole, with a insulation thickness of 50mm. High quality aluminum silicate cotton is used to minimize equipment heat loss The interior of the equipment is made of 1.2mm galvanized sheet with rivets Host external 1.2mm A3 board The dehumidification duct and circulating hot air duct are both made of A3 stainless steel There are observation doors on one side of the main chassis, which can provide timely information on the drying operation of materials There is a thermocouple inside the box, and the XMT instrument displays the working temperature inside the chamber on the control cabinet The dehumidification ducts are equipped with regulating valves, which can adjust the dehumidification volume as needed

2、 Process conditions

1. Material name: melon seeds, peanuts

2. Initial moisture content: 13% (wet basis)

3. Final moisture content: 5% (wet basis)

4. Wet processing capacity: 300kg/h

5. Heating method: Thermal oil

6. Drying temperature: 150 ℃

7. Equipment material: 304 stainless steel at the material contact area

8. Installation: Indoor

9. Power supply: 380V 50HZ

10. Environment: 20 ℃ 760mmHg with a diameter of 80%

Changzhou Xinke Drying Equipment Co., Ltd. specializes in productionHollow blade dryer, sludge dryer, disc dryer, disc dryer, airflow dryer, belt dryer, boiling dryer, vibrating fluidized bed dryerWww.xkdry.com