■ Overview

HAA single seat angle regulating valve is one of the CV3000 series products. The HAA single seat angle type regulating valve core adopts an upward guide structure, with a compact valve structure, low pressure drop loss, large flow rate, wide adjustable range, and high precision of flow characteristics. The leakage rate of the regulating valve complies with ANSI B16.104 standard. The regulating valve is equipped with a multi spring diaphragm or cylinder actuator, which has a compact structure and high output force. This product complies with the GB/T4213-92 standard.
■ Valve body

Type: Angle type single seat cast ball valve

Nominal diameter: 40, 50, 65, 80, 100, 150, 200mm

Nominal pressure: ANSI 125、150、300、600 JIS 10、16、20、30、40K PN1.6、4.0、6.4MPa

Connection type: flange sealing surface type FF, RF, RJ, LG, MFM

Flange standard: JIS B2201-1984、JB/T79.1-94(PN1.6MPa)、JB/T79.2-94(PN4.0、6.4MPa)、ANSI B16.5-1981、HG20594-97、HG20618-97 class

Welding connection: socket welding SW (40~50mm), butt welding BW (65~200mm)

Materials: cast steel (ZG230-450), cast stainless steel (ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, SCS16), LF4, titanium, etc

Upper valve cover: room temperature type P-17~+230 ℃;

Elongation type I EI -45~+566 ℃;

Elongation Type I EI -100~-45 ℃ -196~-100 ℃

Note: The working temperature should not exceed the allowable range of various materials.

Cover type: bolt compression type

Packing: V-shaped PTFE packing, PTFE impregnated asbestos packing, asbestos braided packing, graphite packing

■ Valve components

Valve core type: single seat plunger valve type

Flow characteristics: high-capacity flow characteristics - metal sealing - equal percentage characteristics (% C) and linear characteristics (LC)

Flow characteristics: high-capacity flow characteristics - soft seal - equal percentage characteristics (% T) and linear characteristics (LT)

Flow characteristics: high-precision flow characteristics - metal seal - equal percentage characteristics (% CF) and linear characteristics (LCF)

Flow characteristics: high-precision flow characteristics - soft seal - equal percentage characteristics (% TF) and linear characteristics (LTF)

Materials: Stainless steel (1Cr18Ni9Ti, 1Cr18Ni12Mo2Ti, 17-4PH, 9Cr18, 316L), stainless steel overlay with Stellite alloy, titanium, and corrosion-resistant alloys, etc
■ Executing Agency

Type: HA multi spring thin film actuator, VA6 single acting cylinder piston actuator, VP double acting cylinder piston actuator

Diaphragm material: Ethylene propylene rubber with nylon cloth, Nitrile rubber with nylon cloth

Spring range: 20~100, 80~240KPa (HA type), 190~350, 190~400KPa (VA6 type)

Gas supply pressure: 140~400KPa (HA type), 400~500KPa (VA6 type), 300~500KPa (VP type)

Air source interface: RC1/4 '(HA, VA6 type, RC3/8' (VP type)

Environmental temperature:- 30~+70℃

■ Valve action mode

Using positive or negative acting actuators to achieve gas closed or gas open valves

■ Attachment

Positioner (HEP type, YT1000 type), air filter pressure reducer, holding valve, travel switch, valve position transmitter, handwheel mechanism, etc

■ Structural images