HCB type pneumatic cage regulating valve-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone
Address

No. 18 Xihua Road, Luqiao, Oubei, Wenzhou City, Zhejiang Province

Contact Now

HCB type pneumatic cage regulating valve

Product model: HCB type Product features: HCB type pneumatic balance cage regulating valve controls various high and low temperature high-pressure flu

Contact Supplier

More Products

Product details

HCB type pneumatic balance cage regulating valve

It is a pressure balanced regulating valve that controls various high and low temperature high-pressure fluids. The valve has a compact structure with an S-shaped channel and a guide vane that improves the fluid balance flow around the sleeve, resulting in low pressure drop loss, high flow rate, wide adjustable range, and high accuracy of flow characteristics, in compliance with the IEC534-2-1976 standard. The regulating valve has good dynamic stability, low noise, and minimal cavitation and corrosion. The leakage rate of the regulating valve complies with ANSI B16.104 standard. The regulating valve is equipped with a multi spring diaphragm or cylinder actuator, which has a compact structure and high output force.

This product complies with the GB/T4213-92 standard.

Main technical parameters and performance indicators of HCB type pneumatic balance cage regulating valve

1. Valve body

Type		Straight through double seat cast ball valve
state-owned		Measure the diameter

32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350mm		Nominal pressure
ANSI	125, 150, 300, 600 JIS 10, 16, 20, 30, 40K PN1.6, 4.0, 6.4MPa	Connection type
	Flange connection sealing surface type	FF、RF、RJ、LG、MFM
	Flange standard	JIS
B2201-1984、JB/T79.1-94(PN1.6MPa)、JB/T79.2-94(PN4.0、6.4MPa)、ANSI		B16.5-1981, HG20594-97, HG20618-97, etc
welded connection	Socket welding SW	material
	Cast steel (ZG230-450), cast stainless steel (ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, SCS16), titanium, etc	Bonnet
	Room temperature type (P)	-5~+230℃
	Extended Type I (EI)	+230~+566℃
	Elongation Type II (EII)
-100~-45℃		Extended Type III (EIII)
-196~-100℃		Note: The working temperature should not exceed the allowable range of various materials.

Cover type

Bolt compression type			Packing material
V-shaped PTFE packing, PTFE impregnated asbestos packing, asbestos braided packing, graphite packing	2. Valve components	Valve core type	Double seat sleeve type plunger valve core
internet traffic	High capacity traffic characteristics	Metal seat	Equal percentage characteristic (% V) and linear characteristic (LV)
characteristic			High precision flow characteristics

Metal seat

Equal percentage characteristic (% VF) and linear characteristic (LVF)	Material Science
Stainless steel (1Cr18Ni9Ti, 1Cr18Ni12Mo2Ti, 17-4PH, 9Cr18, 316L), stainless steel overlay with Stellite alloy, titanium and corrosion-resistant alloys, etc	3. Executing Agency
Type	HA multi spring thin film actuator, VA6 single acting cylinder piston actuator, VP double acting cylinder piston actuator
Membrane material	Ethylene propylene rubber with nylon cloth, nitrile rubber with nylon cloth
Spring range	80~240KPa
Gas supply pressure	280~400KPa (HA type), 400~500KPa (VA6 type, VP type)

Gas source interface

RC1/4 '(HA), G3/8', 1/2 '(VA6 type, VP type)

Environmental temperature
-30~+70℃

4. Valve action type

Using positive or negative acting actuators to achieve gas closed or gas open valves		32	40	50	65	80	100	125	150	200	250	300	350
5. Attachment		32	40	50	65	80	100	125	150	200	250	300	350
Positioner, air filter pressure reducer, holding valve, travel switch, valve position transmitter, handwheel mechanism, etc	6. Cv value and travel distance	24	36	60	100	140	220	320	420	820	1000	1440	1900
	Nominal diameter	26	40	75	110	150	240	365	435	850	1035	1490	2000
Valve seat diameter		25			38			75		150	50		100

Rated Cv value

Equal percentage characteristic	Linear characteristics
Rated travel	HCB type pneumatic balance cage regulating valve flange spacing	state-owned	A	call	ANSI	125 FF	JIS	16K
ANSI	300 RF	ANSI	600 RF	JIS	JIS	JIS	JIS	open up or clear out by poking or jabbing
ANSI 150 RF	RF		JIS 20K RF	JIS 40K RF	16K	20K	30K	40K
32	222	231	235	251	235	236	248	251
40	222	231	235	251	235	236	248	251
50	254	263	267	286	265	267	276	286
65	276	288	292	311	290	292	303	311
80	298	313	317	337	310	317	326	337
100	352	364	368	394	360	368	379	394
125	403	footpath	425	457	JIS 10K FFRF	425	JIS 30K RF	457
150	451	465	473	508	475	473	486	508
200	543	560	568	610	570	568	580	610
250	673	PN6.4 MFM	750	750	LG	LG	LG	LG
300	819	-	896	896	-	-	-	-
350	972	-	972	972

-	-	-				-	-	-
Note: The flange spacing complies with the IEC 534-3-1976 standard.	-	Dimensions of HCB type pneumatic balance cage regulating valve	nominal	actuator	H	-	-	-
32	C	500	665	780	1020	281	267	70
	E	500	665	780	1020	281	267	70
40	ΦB	590	760	875	1140	363	350	70
	orifice	500	670	785	1025	281	267	80
50	Room temperature type (P)	595	765	875	1140	363	350	80
	Extended Type I (EI)	575	Room temperature type (P)	880	1130	281	267	88
65	Extended Type I (EI)	630	HA2D、R	930	1180	363	350
	HA2D、R	865	HA3D、R	1165	1495	520	470
	HA2D、R	580	HA3D、R	900	1135	281	267	98
80	HA2D、R	635	745/755	955	1190	363	350
	HA3D、R	870	800/810	1190	1505	520	470
	HA4D、R	610	1035/1045	915	1150	281	267	113
100	HA2D、R	660	755/765	1020	1205	363	350
	HA3D、R	890	810/820	1255	1520	520	470
	HA4D、R	1160	1375	1560	1790	1045/1055	445
	HA2D、R	785	1045	1250	1385	363	350	146
125	810/870	955	1215	1720	1570	520	470	146
150	HA3D、R	785	860/870	1250	1385	363	350	170
	HA4D、R	955	1100/1110	1425	1570	520	470
	VA6R	1220	1480	1720	1850	-	445
200	HA3D、R	1090	1350	1580	1710	520	470	220
250	HA4D、R	1595	1910			520	470	305
300	HA3D、R	1650	1975			520	470	345
350	1020/1045	1670	2050				580	385

HA4D、R
1190/1215

VA6R
-
HA4D、R
HA5D、R
HA5D、R
VP7
Note: 1. The dimensions in column H of the table are for regulating valves without a handwheel mechanism. If a handwheel mechanism is included, the corresponding dimensions of the handwheel mechanism should be added.
2. The dimensions of the elongated H column are indicated by the numbers on the left for valves of JIS 10K and ANSI 125, 150, and on the right for valves of JIS 16K and ANSI 300 or higher.
Ordering Notice: Please fill in the "Specification Sheet" or indicate the following content when placing an order:
1. Product model
2. Nominal pressure

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content