HDR-1The Type A rain gauge adopts the standard rain gauge specified by the China Meteorological Administration, combined with sampling optional components, and is used to measure atmospheric precipitation at certain time intervals. It is suitable for nuclear radiation, nuclear power plants, hydrology, meteorological stations, farms, mines, forestry and other departments. The material is divided into stainless steel material or white iron material, The bottom of the rain gauge is designed with a special installation bracket, which contains a measuring cylinder for storing the rainwater measured by the rain gauge, especially for collecting settling tritium samples.

1、 Parameter characteristics:

1Water inlet area: 314cm²Inner diameter of water inlet: Φ 200+0.6mm

2Machine height: 950mm; Rain gauge height: 533mm

3304 stainless steel bracket height: 315mm net weight: 2.2kg

4Gross weight: 12kg

5The standard range for a rain gauge is 0.05mm to 10mm

6Minimum division of rainfall gauge: 0.1mm

7Capacity of water storage bottle: 2000ml~5000ml

8Normal working environment conditions: -5 ℃ to 45 ℃

9Reserved digital interface for precipitation

10The drain outlet is located inside the box, 60cm above the ground, and can be connected to a plastic hose by oneself

11.The rain gauge is certified by the meteorological department

2、 Instrument composition:

Install one bracket, one water inlet, one snow measuring device, one water storage bottle, one rain measuring cup, one instruction manual, and one certificate of conformity.