One Product Description:
The hard test piece cutting machine is designed specifically for cutting test pieces with high hardness or thickness. It can be used in conjunction with molds and cutting tools to process standard test pieces, such as various dumbbell shaped or long strip plastic or metal test pieces specified in GB, JIS, and ASTM, using a master mold.
II Specification parameters:
1. Horsepower: 600W DC motor;
2. Cutting speed: Two speeds can be switched, high speed at 3600 rpm and low speed at 1800 rpm;
3. Test piece thickness: 2-30mm;
4. Minimum cutting R-angle: R=8mm (cutter radius);
5. Voltage used: single-phase (220V, 110V can be specified);
6. Machine size: 47 × 40 × 45 cm (height);
7. Attachment: Attached is a set of dumbbell shaped molds. If you need other fixtures, please provide parameters such as size and shape
(Length limit 250mm, width limit 100mm).
III other:
1. Equipped with a transparent protective cover: protects the eyes during cutting to avoid being sprayed;
2. Vacuum suction cutting holes: there can be a considerable degree of cleanliness during cutting;
3. With tracks: significantly increasing stability, safety, and smoothness;
4. Fixture stabilizing screws: The stability of changing the surface of the test piece during operation is greatly increased.