One Product Description:
Used to determine the load-bearing capacity, stacking height, and compressive strength of cardboard boxes, fuel tanks, bottle packaging, etc. It can be analyzed through test results to determine whether the characteristics of the tested object and the packaging structure design meet the strength requirements for transportation and handling. Stable control speed, easy to operate, using precision twin-screw and screw dust-proof telescopic device, with added accessories for use as a tension press machine, and humanized safety device; Overloading, emergency, up and down travel setting shutdown, multiple unit selection functions, test results can be printed by a printer, and the machine surface is treated with advanced baking paint for easy and simple maintenance.
Design standards: TAPPI-T804, ISTA, JIS-Z0212, GB4857.3.4, etc.
II Specifications:

1. Display: numerical display, conversion between units such as KG, LB, N, etc;
2. Capacity selection: 0.5, 1, 2, 3, 5, 8, 10, 20 tons or specified;
3. Accuracy: ± 0.5%;
4. Test height: 0.8, 1, 1.2, 1.5m (optional);
5. Test board dimensions: 0.5 x 0.5, 0.8 x 0.8, 1.0 x 1.0, 1.2 x 1.2, 1.5 x 1.5, 2.0 x 2.0 (length x width m);
6. Test speed: 0-300mm/min stepless speed regulation (or specified);
7. Protection devices: leakage protection, overload automatic shutdown protection, travel limit protection;
8. Transmission mode: AC variable frequency motor;
9. Can achieve compressive strength testing;
10. It is possible to conduct stacking strength tests (please specify before placing an order if necessary).

III Computer software control part (if computer software operation control is required, please specify before ordering):

1. Luxury friendly interface testing software based on Windows XP operating system;
2. Adopting a 24 bit data acquisition system, the chipset consists of Motorola 5031AE CPU chips with a resolution of 250000 pixels (upgraded version up to 500000 pixels);
3. Power Tone Kg、Kn、N、Lb， Displacement units such as mm, cm, and inch can be randomly switched;
4. During the testing process, various curves such as load displacement, load time, and displacement time can be randomly switched and displayed;
5. Modular design of test standard editor with one-time input and permanent calling: providing users with the freedom to set the required test standards for the application. The architecture of the test standards is fully developed without industry limitations, covering GB, ASTM, DIN, JIS, BS, and other test standards for metals, non metals, special materials, and finished products;
6. Modular design of test sample data editor with one-time input permanent call: providing users with the freedom to set their needs. The modular design of the test sample data formula editor allows users to freely add, modify, and delete formulas required for various tests to meet the calculation requirements of different tests;
7. Professional level report editor: Simple and flexible. With a simple and easy-to-use report editor like WORD, customers can easily edit and print various reports they like. The program has a built-in dual report editor that fully allows users to freely edit various reports, allowing testers to choose their preferred report format;
8. The software has a dual correction system for force and displacement: automatic calibration, zero point, magnification, software adjustment is very convenient, and the entire process is automatically graded in a concise manner;
9. A one-time calibration permanent memory, where calibration data is stored on any disk of the computer and can be imported at any time in case of computer failure or system reinstallation;
10. All debugging and calibration data, previous test results, different testing methods set or edited by customers, etc. can be freely stored on any disk of the computer. When the computer malfunctions, reinstalls the system, or accidentally deletes or modifies debugging and setting data, backup data can be imported at any time. Repair can be completed without the service of our company personnel, saving time, effort, and cost;
11. Test results and reports can be added arbitrarily, such as maximum test force, average force, average peel force, tear strength, adhesive strength, tensile strength, bending strength, and so on;
12. The software has overload protection function: overload protection load value, breakpoint ratio value, displacement limit value can be freely set by customers;
13. Comparing multiple test results through graphical viewing, freely transforming coordinate display, and freely scaling various test curves allows for reanalysis, recalculation, and more of the test results;
14. At the end of the test, it can be automatically saved or manually saved. After the test is completed, the maximum strength, upper and lower yield strength, tensile strength, compressive strength, elastic modulus, elongation, maximum and minimum values of the peeling interval, average value, etc. can be automatically calculated;
15. Powerful test result data analysis function: In addition to capturing and calculating various parameters of the test curve obtained from general single order control, it can also capture and calculate various order parameters of the curve obtained from special multi-stage control, and can be freely set and calculated;
16. It can perform data analysis on test results under a unified batch number, print reports, and freely select and combine test results from different batch numbers for data analysis;
17. The query function for printing historical test results in reports: it can be queried separately based on the test date, test information, and test results, and the logical combination of the three can also be used for the query and statistical function of historical test results;
18. The software has the function of demonstrating historical test data: increasing the reproducibility of mistakenly deleted test results;
19. The software has password locking function;
20. It has multiple control modes such as positioning displacement, fixed load (constant force) for stack pressure testing, and the number of cycles for changing secondary parameters, which can be freely set.

4 Electrical part:

1. Adopting Omron relays from Japan;
2. The leakage switch is a Mitsubishi Electric switch from Japan;
3. The emergency stop switch controls the brake to stop;
4. Power motor: adopts AC variable frequency motor;
5. Speed regulation: 0~300mm/min stepless speed regulation automatic control.

Five Mechanical part:

• Transmission screw: precision ball screw imported from Japan;
• Protective vertical cover: Taiwan elastic dustproof cover protects the screw rod;
• Bearings: NSK deep groove rolling ball bearings from Japan;
• Guide rod: S45C cold drawn guide rod imported from Japan;
• Transmission chain: 6-point double chain (high carbon steel structure);
• The column is made of aluminum extruded profiles, with overall electrostatic powder coating and advanced baking paint deep processing treatment. The high temperature of 200 ℃ is treated with DuPont powder from the United States;
• Fixture: With the use of tensile fixtures, material tensile testing can be achieved, making it a dual-purpose machine that eliminates the cost of purchasing a computerized tensile and compressive testing machine; The fixture adopts electroplating and other methods, with a hardness of HRBB 55 ° or above and high wear and impact resistance characteristics;
• Machine weight: 550KG (referring to commonly used models with a capacity of 2T and a compressive size of 1.0 × 1.0M);
• Load element: 2000KG (commonly used models);
• Body size: 1.5 (width) x 1.1 (depth) x 1.5 meters (height) (referring to commonly used models with a capacity of 2T and a compressive size of 1.0 x 1.0M);
• Power supply: AC 1 Ø 220V.