HH-4J 4Kong digital display constant temperature stirring circulating water bath

The digital constant temperature stirring circulating water bath is widely used in drying, concentration, distillation, impregnation of chemical reagents, drugs, and biological products. It can also be used for constant temperature heating and other temperature tests in water baths. It is an essential tool for biology, genetics, aquaculture, environmental protection, medicine, health disciplines, biochemical laboratories, education and scientific research.

4Main features of the hole digital stirring water bath:

1The studio water tank is made of high-quality stainless steel material, which has superior corrosion resistance.

2Adopting intelligent temperature control, precise temperature control, digital display, and automatic temperature control.

3To ensure accuracy, advanced electronic technology is adopted to improve temperature control precision.

4Easy to operate and safe to use.

5Magnetic stirring function

6Digital constant temperature stirring circulating water bath

temperature rangeRoom temperature~100℃

temperature controlDigital automatic temperature control

temperature uniformity±0.5℃

resolution0.1℃

Temperature Control RangeRoom temperature~100℃

workrate2KW

Volume（mm）320×320×250

electricitysourceexchange220V 50Hz

Mixing function:4hole×4Hole magnetic stirring

The mixing quantity can be customized according to user needs

Operation and maintenance of stirred water bath:

1The constant temperature stirring water bath should be placed flat on a fixed platform, and the power supply voltage must be consistent with the required voltage of this box. The power socket should use a three hole safety socket, and the grounding wire must be properly connected before use.

2Before the experiment, according to the experimental requirements, add an appropriate amount of clean water or purified water to the water tank until it reaches the partition or higher. Then place the experimental vessel on the shelf and cover the hole cover.

maintenance

1Clean the instrument immediately after each use. Drain the water from the water bath, use a brush to gently remove any coarse debris from the water bath, and clean the pot. Wipe the inner and outer surfaces of the water bath with a soft cloth, and then wipe dry with a cleaning cloth.

2The inner surface of the equipment should be free of water droplets, and the outer surface of the equipment should be bright, clean, and free of stains.

3When using the water bath, it must be reliably grounded and water should not overflow into the control box.

4Do not leave water in the water bath or keep the water level below the electric heating tube to prevent the electric heating tube from bursting and damaging.

5Conduct monthly maintenance checks on the instruments and promptly fill out maintenance records.