Product IntroductionProduct Introduction
Huatian Power has developed and designed a meltblown electrostatic generator for mask production based on customer needs. This equipment can sustainably produce high-voltage static electricity and is mainly used to melt spray static electricity on non-woven masks, ensuring that the filtration efficiency of masks for Staphylococcus aureus aerosols with an average particle diameter of (3 ± 0.3) μ m is not less than 95%. The electrospinning generator for meltblown fabric plays an indispensable role in the mask production line.
The principle of meltblown fabric filtration. The main material of melt blown non-woven fabric is polypropylene, which is an ultra-fine electrostatic fiber cloth that can capture dust. When droplets containing the pneumonia virus approach the meltblown non-woven fabric, they will be electrostatically adsorbed on the surface of the non-woven fabric and cannot pass through. This is the principle of this material isolating bacteria. After being captured by ultrafine electrostatic fibers, dust is extremely difficult to detach due to cleaning, and washing with water can also damage the electrostatic suction ability. Therefore, this type of mask can only be used once.
Meltblown non-woven fabric requires the addition of a trace substance called an "electret", which is easily charged with static electricity. The non-woven fabric can be charged for a long time by applying "corona discharge" to it through an electrostatic electret device.
Electrified processing. Electret refers to a dielectric material with long-term charge storage function, which has the advantages of high efficiency, low flow resistance, antibacterial, and energy saving. On the basis of ensuring the physical collision barrier effect of conventional filter materials, it increases the electrostatic adsorption effect. Electrification treatment makes the filter material fibers charged, combined with the dense characteristics of melt blown ultrafine fiber materials, thus forming a large number of electrodes between charged fibers. Charged fibers can not only attract most of the charged particles in the environment like magnets, but also polarize the uncharged particles, thereby adsorbing some pollutants with smaller particle sizes. Even nanoscale substances such as viruses can undergo electrostatic adsorption or charge repulsion barrier.
Product Name: Meltblown Fabric Electrostatic Electret Generator, Meltblown Fabric Electrostatic Electret Equipment, Non woven High Voltage Electrostatic Generator, Mask Electrostatic Generator, Meltblown Fabric Electrostatic Generator, Electrostatic Generator
Product parametersProduct Parameters
Technical Parameter
specifications | 60/2 |
rated voltage | 60kV |
Rated current | 2mA |
rated power | 120W |
Overall quality | 9kg |
Whole machine volume | 465*390*190mm3 |
Height of pressure doubling cylinder | 440mm |
voltage accuracy | ± (1.0% reading ± 2 words) |
Output current accuracy | ± (1.0% reading ± 2 words) |
ripple factor | ≤0.5% |
way of working | Intermittent use, rated load for 30 minutes |
Overload capacity | The no-load voltage can exceed the rated voltage by 10% and be used for 10 minutes |
The maximum charging current is 1.25 times the rated current | |
Power supply: AC220V ± 10% 50Hz | |
work environment | Temperature:- 10-40℃ |
Relative humidity: not exceeding 85% at room temperature of 25 ℃ (no condensation) | |
Altitude: below 1500 meters |
1. The appearance of the product is subject to the actual product. Technical parameters and models are subject to change without prior notice. If there is any act of theft or copying, legal responsibility will be pursued.
2. To learn more about Huatian products, please enter the product center. Service Hotline: 400-8855-448
Product FeaturesProduct Characteristics
-
1. The instrument has high safety and comprehensive protection.
-
2. The instrument has good electrical performance, strong moisture resistance, no leakage, good performance, and high accuracy.
-
3. The instrument can attach static electricity to the raw materials of the mask, so that the filtration efficiency of the mask for Staphylococcus aureus aerosols with an average particle diameter of (3 ± 0.3) μ m is not less than 95%.
-
4. Using a dedicated high-voltage power supply, digital control method, fully abnormal slow start, and nanosecond arc response capability, the melt blown production line ensures fault free and all day operation.
-
5. Small energy storage, no damage to non-woven fabric during discharge and ignition; The nanosecond arc response capability ensures that the power supply can quickly restart within 20ms, resulting in uniform charging effect. High stability can make the ionization effect more stable.
-
6. It has the advantages of high efficiency, low flow resistance, antibacterial, and energy saving. On the basis of ensuring the physical collision barrier effect of conventional filter materials, it increases the electrostatic adsorption effect.
Product AtlasProduct Picture
Product Attachment Diagram
Instrument host
High pressure multiplier cylinder
Microampere meter
discharging rod
current limit resistor
High voltage line (with shielding)
power line
Special four core connecting wire
ground wire
fuse
Instruction manual, inspection report, certificate of conformity
Product detail diagram
appearance
panel
Overvoltage setting
Wiring hole
button
Digital display screen voltage
Digital display screen current
Voltage adjustment knob
Production process diagram
On site production drawing 1
On site production drawing 2
On site production drawing 3
On site production drawing 4
product certificateProduct Certificate
Our company's products are strictly produced in accordance with international and national standards and industry regulations. They have passed the testing of national, provincial, and municipal power research institutes, measurement centers, and authoritative power departments, and have fully passed the ISO9001 international quality management system certification, the People's Republic of China manufacturing measuring instrument license, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, and GB/T45001-2020 occupational health and safety management system requirements.