1、 Introduction:

HY-3Multi functional speed regulating oscillatorIt is an ideal tool for laboratories in various colleges and universities, environmental protection, health, epidemic prevention, petroleum, metallurgy, chemical, grain and other units. It integrates horizontal reciprocating and vertical oscillation, greatly improving the work efficiency of laboratory personnel. It can be used for solution analysis in containers such as test tubes, separation buckets, and triangular flasks, solving the disadvantage of other oscillators having only one oscillation mode, with low noise, and convenient for laboratory personnel.

IIHY-3Multi functional speed regulating oscillatorTechnical parameters:

1. Oscillation frequency: 0-300 times/minute (stepless speed regulation) A: for speed measurement (speed digital display)
2. Vibration amplitude: 20mm
3. Continuous work: 8 hours
4. Working mode: Vertical, reciprocating
5. Power single-phase AC: 220V ± 10V 50HZ
6. Motor power: 120W

IIIHY-3Multi functional speed regulating oscillatorusage method:

When using this instrument, first connect the power supply, then place the volumetric flask that needs to oscillate the solution into the spring fixture, cover the mouth tightly with a rubber plug, and then turn on the power switch to start working. When working, please choose the oscillation speed and mode that you are satisfied with, and start at a low speed when starting up.

4HY-3Multi functional speed regulating oscillatormatters needing attention:

To ensure safety, please connect the ground wire (i.e. three pin plug) when using
When not working, the power should be turned off and cut off to prevent accidents.
3. The instrument should be kept clean and dry, and it is strictly prohibited to use a metal hammer to strike it.