HZXJ-T4B (desktop) microcomputer LCD display fully automatic crude oil moisture content control measuring instrumentApplicable standard: GB/T8929-88 for national standard use

HZXJ-T4B (desktop) microcomputer LCD display fully automatic crude oil moisture content control measuring instrumentAfter turning on, preheat3After minutes, the instrument enters working mode50℃This temperature can be operated by default, and the machine automatically completes the test program. After the test is completed, the machine will automatically stop and report the function. This instrument meets any conditions required for the experiment, and the heating temperature can be freely selected. The digital tube displays the temperature, and the temperature control sensitivity is high to prevent boiling. When the temperature reaches the set temperature, the power is disconnected and the fan automatically starts to dissipate heat. Automatic heating below the set temperature, with good automatic constant temperature effect. The stirring speed can be set arbitrarily according to the experimental needs to achieve magnetic emulsification

HZXJ-T4BDesktop microcomputer fully automatic crude oil water content LCD display sub control measuring instrument

1 After turning on, preheatIntroduction:

The microcontroller program controls the instrument to complete the entire experimental steps, using a backlit LCD display screen. Through the program, the temperature can be controlled with wide range and high precision, so that the oil can reach a certain temperature and automatically cool down, eliminating the hidden dangers caused by excessive temperature and sudden boiling of the oil. Microprocessing technology uses liquid crystal displays to better control and monitor the working status of instruments. It's a microcontroller developed by my unitHZXJ-T4BThe desktop analyzer is a reliable instrument for laboratories, oil production plants, gathering and transportation stations, scientific research units, and various oil post laboratories.

II After turning on, preheatPerformance characteristics:

1The whole machine is integrated to complete the entire testing process.

2Adopting a backlit large screen LCD display.

3Equipped with micro memory function.

4、HZXJ-T4B(Desktop) type functionally independent.

5Measurement accuracy≥100%.

6Measurement time:10－15min.

7Six separate control channels.

8, achieved“start——Free from guard”The operating mode.

9There is a micro control anti-counterfeiting mark.

III After turning on, preheatworking principle:

This instrument can simultaneously test four samples at a time. When the number of samples is less than four, due toHZXJ-T4B(Desktop) type samples can be freely selected and used immediately, as each sample hole is an independent micro control device. Reaching the optimal temperature required for the experiment50℃This temperature can run by default. When the temperature reaches the default temperature, the heating system will automatically protect, disconnect the heating, and start the fan to dissipate heat. Automatically heating below the default temperature, with the most ideal constant temperature effect. The stirring speed is set by default based on the optimal effect of magnetic emulsification, and does not require further adjustment.HZXJ-T4BAll the necessary conditions for testing with desktop instruments have been fully automated into the program, eliminating the need for staff to monitor, increasing work efficiency, shortening testing time, and achieving“start——Free from guard”The operating mode.

4 After turning on, preheatCrude oil ratio table

Due to the varying workloads of different units,HZXJ-T4BThe (desktop) fully automatic LCD microcontroller with four components comes with the following specification table for reference.

5 After turning on, preheatInstallation Introduction:

There is a pull-out bracket at the back of the casing, which is hollow and can hold pure water for circulation. It solves the problem of instrument hoses wrapping around the entire bracket in the past, making the overall view three-dimensional. Simply use a hose to hold itHZXJ-T4BThe inlet and outlet of the desktop type are connected together. Achieve convenient and simple work efficiency during installation.

VI After turning on, preheatusage method:

1According to the fifth installation introduction, fix the bracket, pour the sample oil into the glass instrument, install the glass instrument, and then connect the inlet and outlet of the condenser pipe to the bracket water nozzle with a hose

2Insert the power into the power socket, and the purified water cooler will start cooling.

3The LCD screen displays“snowflake”Refrigeration indicator, this instrument is in working condition.

4The LCD screen displays1.2.3.4.5.6This is a symbol of the number of holes,“eleven”The key is a hole selection key.

5If pressed“＋－”Key, hole number key“1”Jumping, press the start button again, hole count“1”Enter the working state of heating, stirring, and circulating water.

7, Press“stop”This is the stop hole number working status indicator. When the sample is different and the hole number test is completed, press“stop”Press the key to enter the restore state when it is still working.

8After the experiment is completed, it will automatically cool down and enter standby mode.

7 After turning on, preheatmatters needing attention:

1Before use, it is necessary to read the instructions and operate according to the instructions. It is not allowed to open or ask other manufacturers for repairs without authorization, otherwise our factory will not be responsible.

2White smoke and odor are normal phenomena when used repeatedly.

3Due to the difference from the old distillation method, the cooling water flow rate is increased, and it is strictly prohibited to change the gasoline dilution ratio of the new distillation method.

4This instrument is for rapid distillation and cannot be used30Centimeter thin mouth（12The condenser must be used19Moisture analyzer with the above caliber.

5When the backlight LCD display light does not light up or its keys malfunction, please immediately turn off the power and stop working.

6The heating element should avoid spilling solution, which may cause electrical leakage.

7The casing should be kept clean to increase usage time.

8 After turning on, preheatafter-sale service:

1If the instrument accessories are damaged, please replace them with specialized accessories from the manufacturer to continue using the instrument1Free warranty within the year.

2During the use of the instrument, lifelong free maintenance is provided.