TC-501DHigh and low temperature exchange device

1High and low temperature exchange deviceProduct Introduction

TC-501DIt is a new type of product that circulates experimental materials through cold and hot cycles,It can be used to determine the temperature fatigue aging performance of materials, providing stable and reliable test conditions for material testing.It can automatically lift the experimental materials from one temperature zone water tank and place them in another temperature zone water tank. After reaching the set time, it can then return the experimental supplies from the other temperature zone water tank to the original temperature zone water tank, and repeat this process.

This product has an automatic counting function, which can repeatedly transfer relevant items from one temperature zone to another within the set counting range. Users can automatically set the time for the product to be placed in the temperature zone and the switching speed between the two temperature zones.This product adopts a microcomputer intelligent control system, fully microcomputer controlled (fully upgraded from the previous two generations), easy to operate, and can be widely used in dental hospitals and other related scientific research departments. This product is a domestic product, and its launch provides necessary technical support for dental research.This product is mainly used for the research of oral and dental materials, and can also be used in medical, chemical, pharmaceutical, university laboratories and related research institutes, laboratories and other institutions.

twoWorking principle

The exchange and immersion of samples between high and low temperature tanks are completed by mechanical units, and this instrument is a single arm rotating immersion type. After immersing the sample in the low-temperature tank for a certain period of time, remove it from the liquid level, rotate it 180 °, and then re-enter the high-temperature tank. After staying for a certain period of time, remove the liquid level again as a cycle, and the technician counts once. After the sample is taken out of the water surface, it is transferred from the low-temperature tank to the high-temperature tank and immersed in the water surface again with an adjustable time interval of about 2-300 seconds (this instrument is also called a cold and hot cycle instrument).

3、 Technical parameters

1. The temperature control range of the low-temperature bath is 0-100 ℃, and the constant temperature wave degree is ≤± 0.5 ℃;

The temperature control range of the constant temperature bath is RT 5-100 ℃, and the constant temperature wave degree is ≤± 0.8 ℃.

The accuracy is ± 0.1 ℃, and the uniformity is ± 0.3 ℃.

2. Low temperature tank cooling power 368W; Heating power 800W × 2 (dual slot).

3. The effective volume of the liquid tank is ≥ 10L; The net size of the studio is 300 × 250 × 180mm.

4. Adjustable range of slot to slot conversion speed 2-20 rpm

5. The adjustable range of dwell time in the slot is 2-300 seconds (the conversion time is tentatively set at 30 seconds)

6. The adjustable range of cycle times is 1-9999 times

7. The surface LED display of the controller can control temperature, conversion speed, dwell time, and cycle times

8. The load of the conversion bracket shall not be less than 250G.

9. The reference value for external dimensions is 670 × 550 × 780mm.

10. The power supply voltage is 220V, 50Hz.

11. The outer shell is made of 1.0 cold plate electrostatic spraying, and the inner liner is made of high-quality 304 stainless steel.