High power pipeline pump|Seawater pipeline pump|Copper impeller pipeline pumpSuitable for firefighting, equipment heat dissipation, seawater desalination on offshore platforms, and can also be used as a ground source heat pump air conditioner for heating up in coastal areas, for all purposes of seawater enhancement. This equipment has low noise, high efficiency, and saves electricity

Impeller: Tin bronze (various grades) such as ZCuSn3Zn8Pb6Ni1 Pump casing: Tin bronze (can be cast in various grades) such as ZCuSn3Zn8Pb6Ni1 Pump shaft: Stainless steel 316L Filter: 316L. Connecting bolt: 316. Outlet flange: 316. Motor upper and lower guide bearing seat: 316. Middle section: 316. Motor shaft: 316 motor seal: rubber seal O-ring; Machine sealing The motor expansion adjustment bag is made of rubber material.

Pipeline pumpThe motor adopts a second level efficiency YX3 motor, which can save 30% energy. One year's electricity bill can buy a new 30KW pump:
The YX3 series motor is a fully enclosed, externally fan cooled, squirrel cage structure. This series of motors is the basic series of low-voltage cage type three-phase asynchronous motors that use cold-rolled silicon steel sheets as the magnetic material throughout the series. It has the characteristics of high efficiency, novel design, beautiful appearance, low noise, high torque, good starting performance, compact structure, and easy use and maintenance. Its efficiency fully complies with the second level energy efficiency requirements of GB18613-2006 "Energy Efficiency Limits and Energy Efficiency Evaluation Values for Small and Medium Three Phase Asynchronous Motors", using F-level insulation, and the entire series of temperature rise is assessed according to B-level, greatly improving safety and reliability. The installation dimensions of the motor comply with IEC standards, and the protection level of the motor casing is IP55. This series of electric motors can be widely used in various mechanical transmission equipment such as machine tools, fans, water pumps, compressors, transportation, agricultural food processing, etc.

High power pipeline pump|Seawater pipeline pump|Copper impeller pipeline pumpadvantage:
Smooth operation: The absolute concentricity of the pump shaft and excellent dynamic and static balance of the impeller ensure smooth operation without any vibration.
Drip proof: Hard alloy seals made of different materials ensure that there is no leakage during the transportation of different media.
Low noise: The water pump supported by two low-noise bearings runs smoothly, with almost no noise except for weak motor noise.
Low failure rate: The structure is simple and reasonable, and the key parts are of world-class quality; Matching, the whole machine's fault free working time is greatly improved.
Easy maintenance: Replacing seals and bearings is simple and convenient.
More land saving: The exit can be arranged in three directions: left, right, and up, which is convenient for pipeline layout and installation, saving space

1. The suction pressure is ≤ 1.6MPa, or the maximum working pressure of the pump system is ≤ 1.6MPa, that is, the pump suction inlet pressure+pump head is ≤ 1.6MPa, and the pump static pressure test pressure is 2.5MPa. Please specify the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6MPa, it should be separately stated when ordering, so that the overcurrent and connection parts of the pump can be made of cast steel materials during manufacturing.
2. Environmental temperature<40 ℃, relative humidity<95%.
3. The volume content of solid particles in the conveyed medium shall not exceed 0.1% of the unit volume, and the particle size shall be less than 0.2mm.
Note: If the medium used is with small particles, please indicate it when ordering so that the manufacturer can use wear-resistant mechanical seals.

Pipeline pumpIt is a universal fluid machinery widely used in chemical industry systems. It has many advantages, including a wide range of performance adaptability (including flow rate, pressure head, and adaptability to the properties of the conveying medium), small size, simple structure, easy operation, and low operating costs. Usually, the flow rate and pressure head of the selected pipeline pump may not be consistent with the requirements in the pipeline, or due to changes in production tasks and process requirements, it is necessary to adjust the flow rate of the pump, which essentially changes the operating point of the pipeline pump.

Please provide as much as possible for ordering:

1. Model 2. Diameter 3. Head (m) 4. Flow rate 5. Motor power (KW) 6. Speed (R/min) 7. Material 8. Voltage (V)

Welcome to visit our Quandabf Pump Valve website (www.quandabf. cn) if you have any questions You can call us and we will do our best to provide you with high-quality service.