overview

A high-precision constant temperature bath is used to place the required medium in the bath, set the temperature through a temperature controller, and then turn on the equipment. The heating tube is used to control the temperature of the medium to reach the temperature set by the thermostat; During the process, the circulating water pump continuously rotates through the impeller, and the liquid continuously enters from the inlet pipe. After passing through the pump body, it is discharged from the pump's discharge port to maintain constant temperature control. The equipment can also maintain a constant temperature field, and through the external circulation interface, the constant temperature medium is led out to the equipment that needs constant temperature control, providing constant temperature control for other equipment.

Product features:

1. The temperature controller using advanced temperature control technology ensures a temperature control accuracy of up to 0.005 ℃ in the bath.

2. The constant temperature chamber body is specially designed to maximize its usable area, minimize constant temperature fluctuations, and ensure temperature stability. The temperature field uniformity is ± 0.005 ℃, and the unique bottom jet technology ensures temperature uniformity.

3. By using a compressor for refrigeration, there is sufficient cooling capacity to quickly cool down and maintain a constant temperature even when the ambient temperature is high.

4. The tank body is designed with stainless steel to maximize its overall service life.

5. Safe low water level alarm, automatically cuts off the heating source, and prevents dry burning.

6. The pipe joint adopts a quick plug connection.

working principle:

1. The constant temperature chamber is equipped with a temperature probe for real-time monitoring of temperature.

2. Temperature controlled mixing adopts an isolated water pump for internal and external circulation water quality mixing. The constant temperature chamber is equipped with a temperature probe to deliver the temperature to the thermostat, which uses PID control to achieve a constant temperature between cold and hot.

3. The depth of the bath is 20cm, and the opening can be customized with a calibration device.

Precautions for use:

The most common problem with baths is the inability to maintain a constant temperature, often due to improper placement and inadequate daily maintenance. Please pay attention to the following similarities in system settings and maintenance during use:

1. Please place this product in a well ventilated location below 35 ℃.

2. Do not place obstacles on the ventilation port of this product.

3. If the wind blows onto the water pipe, it will reduce the cooling effect. Try to cut the water pipe as short as possible, but do not bend it.

4. Please pay attention to the dust in the environment and clean the dust at the air inlet in a timely manner.