Hommel, Germany (Jena)Portable roughness tester HOMMEL-ETAMIC W10

Hommel HOMMEL-ETAMIC W10 roughness tester is used forMeasurement in production environments, mobile measurement of small shaft components, probe rotation of 90 °, used for measurement within grooves and grooves or between shaft shoulders, horizontal measurement,
Mobile typeNot dependent on power supply, equipped with wireless cable feeding device, can be flexibly used in actual operation
Simple formulaIntuitive and modern operation through touch screen
Complete formMeasure all common roughness characteristic parameters that comply with international standards
Single typeDisplay results including tolerance assessment and surface cross-section
practicalBuilt in printer can record measurement results in a timely manner
Safe and secureReal time inspection measuring instrument with built-in roughness standard
comfortable:LV17's built-in charger housing
variousHorizontal scanning, protrusion or vertical measurement

HOMMEL-ETAMIC W10 portable roughness meter from Germany

Easy to operate and comfortable
Eight measurement programs are used to evaluate all common roughness characteristic parameters for four basic function keys. The possibility of tolerance evaluation is wide, and input data is quickly and comfortably obtained through a touch screen. The results show: characteristic parameters, contour lines, interactive material support rate curves, and a wide range of statistical functions

Measurement at various locations
Head measurement - Stable measurement of head position on small workpieces - Precise polishing of workpiece support on the support shaft
Vertical measurement -3-point support on the back of the feed equipment - safe positioning when measuring the vertical workpiece surface

Very diverse
Horizontal scanning - probe swings 90 ° to enter deep, groove or flange ring - scans surface in the opposite direction of feed
Mobile measurement on small axis - supporting prism of the axis with a diameter greater than 10 mm
Adjust height through tripod legs - detachable tripod legs for adjusting the feed height of small workpieces

Height measurement tripod HS300 (optional)
Including a mobile W10 and a fixed measuring position for firmly positioning the roughness probe, with a height adjustment range of 300 mm and an infinite dumping device ± 180 °

Appropriate compatibility
Compatible with PC interface - connect LV17 through USB interface - perform simple data operations through mobile data storage

Diversity and Interaction Assessment
Sectional display diagram, 3 expansion stages
Select P-R-W-section
Statistical table, displaying up to 10 characteristic parameters at once, analyzing material composition, interactive material ratio curve, selecting P-R-W-section
Diverse ways
Integrated V-shaped groove - used to directly place small shaft components on the instrument housing - together with support feet to achieve stable and mobile measurement
Integrated shelves and loading plates - used for placing feed units, safe and reliable - protecting probes - due to automatic battery charging, the feed unit is always in standby mode

Ensuring the reliability of measurement results anytime, anywhere
The integrated roughness standard block and interchangeable roughness standard block are safely integrated into the W10 host, allowing for real-time inspection of the measuring instrument on site. The measurement configuration is stable, and there is one measurement program that stores the set value and is dedicated to detecting the measuring instrument

LV17 feed unit

Easy to replace probe, using a supporting prism, precise workpiece positioning, transparent probe protection device with measurement position illumination (product), wireless Bluetooth ® technology

Hommel HOMMEL-ETAMIC W10 roughness tester technical parameters

range： 320 μm (-210/+110 μm)
probeInteractive sled gauge T1E 2 μ m/90 °
The maximum detection length： 17,5 mm
cut off： 0,08 / 0,25 / 0,8 / 2,5 mm
Detection speed vt： 0,15 / 0,5 / 1 mm/s; Move backwards 3mm/s
DIN EN ISO 4287： Ra, Rz, Rmax, Rt, Rq, RSm, Rp, Rv, Rq, Rsk, Rku, Rdc, Rdq, RzISO, Rmr, Rmr(c), C(Rmr), Pt, Pz, Pa
DIN EN ISO 13565-1,-2： Rk, Rpk, Rvk, Mr1, Mr2, A1, A2
MOTIF ISO 12085： R, AR, Rx, CR, CL, Nr, CF
ASMB46：Rqm
JIS B601 (2001)： Rz-JIS
DIN EN 10049： RPc
Daimler MBN 31007： R3z
Printing processStatic thermal printing
Paper/Printing Width： 57 ±0,5 mm / 48 mm
Paper roller： Ø = 31 mm
Basic equipment W10： 224 x 226 x 70 mm, 980 g
Feed equipment LV17： 151 x 50 x 55 mm, 275 g
Data storage device2000 measurement dataset, 500 cross-sectional dataset

HOMMEL-ETAMIC W10 Supply Scope
W10 basic equipment, feed equipment LV17, roughness probe T1E
Probe protection, supporting prism for small axis (diameter greater than 10 mm)
USB cable, power adapter 90-240 V, lithium battery
Roughness standard, internal hexagonal wrench
Factory acceptance certificate, roughness standard data page
Operating instructions, box