TM-105-50T hot press forming machine

Product Name: Thin film switch hot press drum machine, four column hydraulic press, button convex press, Chengdu hot press forming, Taiwan hydraulic hot press, hydraulic shaping machine, small hydraulic press;

Scope of application:
This series of hydraulic presses is widely used for various types of PV, PE, PC film switches, pot pieces, film panel embossing, etc; And some products that require heating and molding are commonly used equipment in the electronics and plastic industries;
Product features:
1. This series of hydraulic machine tools is powered by a liquid pressure of 1-14MPA, and is externally connected to a three-phase AC380V 50HZ or three-phase AC220 60HZ AC power supply. The total power consumption does not exceed 8.5KW;
2. This series of equipment uses liquid as the medium to transfer energy, with high efficiency and adjustable holding time within 0-24 hours;
3. The noise level during device standby should not exceed 80 decibels;
4. The upper and lower working surfaces are equipped with heat-treated heating plates, with a universal T-shaped groove fixed mold, using intelligent temperature controller PID control, with high accuracy and temperature error within ± 1 ℃;
5. Adopting a four column three plate structure, the vertical accuracy of the movable plate is controlled by four precision guide sleeves, and the parallel accuracy of any point on the lower and upper working surfaces reaches below 0.08MM;
6. Adopting an adjustable positioning cylinder, the positioning accuracy of the bottom dead center is high, with a repetition accuracy of less than 0.01mm, ensuring 100% imprint depth;
7. It has an automatic counting function, with two control modes: manual and semi-automatic. The press fit upper mold can be manually stopped within any travel range. It is equipped with an emergency rebound button and can also be equipped with an infrared handguard device;
8. The descent speed of the spindle is 88MM/S;
9. Customers can adjust the pressure, compression stroke, holding time, and closing height themselves for easy operation;
10. The hydraulic system is equipped with a built-in oil tank at the top, and the frame is sealed on all four sides. The appearance is clean and stable. The workbench is equipped with casters and foot cups, which can be easily moved. The maximum weight of this series of models does not exceed 450KG;

The output range of this series of hydraulic machinery is 5tf 10tf... 50tf optional (1tf=1000kgf=9.8KN), can also be customized according to customer needs;