1I-1B thick slurry pumpProduct Overview:

The I-1B series thick slurry pump is a single screw volumetric pump that utilizes the rotation of an eccentric single screw screw within a double screw liner to move the thick slurry along a spiral groove from the suction port to the discharge port, achieving the pump's conveying function.

2、 Product features of I-1B thick slurry pump:

1. It can transport high concentration, high viscosity<10000 PaS and suspended slurry containing particles.
2. The conveying fluid flow is stable, without overcurrent, pulsation, stirring, or shearing of the slurry.
3. The discharge pressure is independent of the rotational speed, and high discharge pressure can be maintained even at low flow rates.
4. The flow rate is proportional to the speed, and flow regulation can be achieved through a variable speed mechanism or a speed regulating motor.
5. Strong self-priming ability, can directly suck liquid without the need for a bottom valve.
6. The pump can be reversed, and the liquid flow direction is changed by the rotation direction of the pump, which is suitable for situations where the pipeline needs to be flushed in the reverse direction.
7. Smooth operation, low vibration and noise.
8. Simple structure, easy disassembly and maintenance.
This pump is widely used in chemical, pharmaceutical, brewing, papermaking, food and other units.

IIII-1B thick slurry pumpStructural material form:

I-1BB type: Shell casting, transmission components (main shaft, screw, and winding shaft) made of 2Cr13 stainless steel, suitable for conveying general neutral and concentrated slurry, as well as general slightly acidic and alkaline slurry.
I-1BF type: The transmission components and pump casing in contact with the slurry are both made of stainless steel, suitable for conveying food, pharmaceutical, and corrosive slurry.
Rubber bushings are available in general wear-resistant rubber, food grade rubber, and oil resistant rubber for users to choose from.
The transmission methods include direct transmission between the motor and the pump shaft, direct transmission between the motor and the pump through a reducer, and transmission between the motor and the pump shaft through a V-belt pulley.
There are generally enclosed, explosion-proof, and electromagnetic speed regulating motors available for use with electric motors, as well as continuously variable transmissions and gear reducers for users to choose from.
(Material, stainless steel, cast iron)

4、 Technical parameters of I-1B thick slurry pump:

Flow rate: 1.5-38m3/h;
Head: 30-80m;
Power: 1.1-15kw;
Speed: 960r/min;
Temperature: 0-100 ℃;
Caliber: 25-150mm.

5、 Performance parameter table of I-1B thick slurry pump:

Structural diagram of I-1B thick slurry pump

1. Motor 2, coupling 3, bearing body 4, motor base 5, screw shaft 6, rubber sleeve 7, pin cap 8, bearing 9, hollow shaft 10, packing cover 11, winding shaft 12, three-way pump body 13, pin cap 14, straight tube 15, imported

I-1B thick slurry pumpOutline installation dimension diagram: