VIP member
IHZ self-priming chemical pump
The IHZ horizontal self-priming chemical centrifugal pump is designed according to the ISO2858 standard and is a derivative series of IH standard chem
Product details
The IHZ horizontal self-priming chemical centrifugal pump is designed according to the ISO2858 standard and is a derivative series of IH standard chemical pumps. Its basic dimensions and performance are the same as those of IH pumps. It is a product with stable performance, diverse sealing forms, and standardized component dimensions. This series of pumps eliminates the suction management bottom valve. As long as there is a small amount of liquid stored in the pump body, there is no need to inject liquid when starting, and it is completely dependent on self vacuuming; After sucking up the liquid, the self-priming height can reach 6-8 meters, which can replace the work of the submersible pump within this range. Unlike other self-priming pumps that can only operate at heights below 5m, temperatures below 120 degrees, and have a single sealing form, the IHZ type greatly improves the functionality and range of use of self-priming pumps.
Product features:
The IHZ horizontal self-priming chemical pump is suitable for conveying various corrosive or non polluting media similar to water in industries such as chemical, petroleum, metallurgy, power, papermaking, food, pharmaceutical, environmental protection, wastewater treatment, and synthetic fibers.
Product Usage:
Flow rate: 6.3-400m3/h
Lift: 5-132m
Speed: 1450-2900r/min
Power: 0.55~110KW
Imported diameter: 50-200mm
Work pressure: 1.6Mpa
Working temperature:- 40℃-+250℃
System working pressure ≤ 1.6Mpa
Self suction height: 6-8m
Select different stainless steel corrosion-resistant materials, sealing forms, and impeller forms according to different media
Select the cooling method and sealing cooling method for the bearing box based on the temperature
Lift: 5-132m
Speed: 1450-2900r/min
Power: 0.55~110KW
Imported diameter: 50-200mm
Work pressure: 1.6Mpa
Working temperature:- 40℃-+250℃
System working pressure ≤ 1.6Mpa
Self suction height: 6-8m
Select different stainless steel corrosion-resistant materials, sealing forms, and impeller forms according to different media
Select the cooling method and sealing cooling method for the bearing box based on the temperature
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-