VIP member
ISR type hot water circulation pump
ISR type hot water circulation pump
Product details
Typical Uses
Transporting clear water and liquids with physical and chemical properties similar to water without solid particles
·Boiler hot water circulation
·Heating up
Characteristics of water pump
·Simple structure, reliable performance, easy to use and maintain
·Small size, light weight
·Good anti cavitation performance
·Low power consumption
STRUCTURE DESCRIPTION
·The ISR type hot water circulation pump has a wide range of universality, with a total of 140 specifications in the entire series, but only four shafts are used; Shafts, bearings, shaft seals, impeller fasteners, etc. of the same specification can be interchanged; There are only four types of suspension for the entire series of pumps
·Rear opening, there is no need to disassemble the suction and discharge pipelines when disassembling the pump cover and impeller
·The suspension is equipped with two ball bearings, which are lubricated with mechanical oil or grease
·The pump is directly driven by an electric motor through an elastic coupling
·The vortex chamber, feet, inlet flange, and outlet flange are cast as a whole
·High temperature resistant double end mechanical seal for shaft seals
performance parameter
·Inhalation caliber: 50-125 mm
·Discharge diameter: 32-100 mm
·Flow rate: 6.5-1112.1 m3/h
·Lift: 14-133 meters
·Speed: 1450/2900 r/min
·Temperature: ≤ 130℃
·Working pressure: The maximum operating pressure is 1.6MPa, and a 2.4MPa pressure test is conducted before leaving the factory
Tags:& Nbsp Hot water circulation pump Circulating pump Pipeline pump
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-