ItalyKT-50Introduction to Imported Paper Moisture Tester and Cardboard Moisture Tester:

Crotna, Italy（KLORTNER-50）PaperMoisture meter, capable of quickly measuring through simple contact50～500g/m2The moisture content of various types of paper, cardboard boxes, corrugated paper, etc. between them, without damaging the materials being tested.

Advanced electromagnetic wave sensing technology can penetrate paper to a depth of up to50mmGenerate a three-dimensional magnetic field for on-site measurement. Therefore, it is a highly accurate paper moisture meter.

After the instrument is turned on40Automatically shut down in seconds Save energy and protect instruments for longer periods of use.

The instrument is equipped with a low voltage display, which is displayed in the upper left corner of the screenLOBATRemind users to replace the power supply in a timely manner(9V、6F22One battery).

1ItalyKT-50Imported Paper Moisture Tester _ Cardboard Moisture TesterTECHNICAL INDEX

1Measurement range:0～50%

2Display:LCDliquid crystal display

3Gear adjustment:50～500g/m²（1-5File)

4Scan depth:0～50mm

5Resolution:0.1%

6Accuracy: ±0.5%

7Volume and weight:120×60×26(mm),150g

IIItalyKT-50Imported Paper Moisture Tester _ Cardboard Moisture TesterUsage

Select gear switch:

1Files: cardboard boxes, corrugated cardboard

2File:50Paper below grams, pulp board paper, etc

3Files: corrugated paper, writing paper, kraft paper, box board paper

4Files: Newsprint, Whiteboard, Coated Paper

5Files: Copperplate paper, photocopy paper, fax paper

Due to different paper structures, their dielectric constant also varies; The above gears are recommended. If there is any error, please compare and verify. For example, measuring a known moisture content is8%The paper, adjust the gear switch to4When in gear, the measured number is displayed as08.0In the future, when measuring similar types of paper, the gear should be selected as4The file.

IIIItalyKT-50Imported Paper Moisture Tester _ Cardboard Moisture Testerprecautions

1Due toKLORTNER-50The electromagnetic wave penetration depth of the paper moisture meter reaches50mmTherefore, when measuring the average moisture content of paper, it is required that the stack thickness of the tested paper or cardboard box should not be less than50mm.

2If the instrument does not display when turned on00.0±00.5Within the range, please open the back cover of the battery and remove the battery. There is a zero position adjuster on the inside of the battery box. If the positive value is less than zero, adjust counterclockwise; On the contrary, adjust clockwise.

3Due to the use of electromagnetic wave induction for measurement in this paper moisture meter, there should be no metal or other inductive objects around or at the bottom of the instrument during measurement, otherwise it will affect the measurement accuracy.

Jingtai Instrument Knowledge:The moisture content of paper has a significant impact on printing. If the moisture content is too low, the paper will become brittle and static electricity is easily generated during printing; Excessive content will make it difficult for the ink to dry. The change in moisture also has a significant impact on the various characteristics of paper. With the change in moisture, its basis weight, tensile strength, flexibility, folding resistance, etc. will all change. The paper size will also expand and contract, and even curl, curl, wrinkle, and ruffle edges will occur. So it is extremely important to measure the moisture content of paper.