Introduction to Individual Explosion proof Dust Sampler:
The FCC-3000G explosion-proof individual dust sampler is widely used in environmental health monitoring, occupational health monitoring, industrial and mining enterprises, scientific research workplaces, and other workplaces to collect actual exposure to dust and dust concentration in the workplace. This instrument is designed according to MT162-95 "General Technical Conditions for Workplace Dust Samplers", Q/FY-02-2005 Dust Sampler Enterprise Standard, and GB3836.2000 standard Exib level (intrinsic safety type) explosion-proof design. The instrument is equipped with a set of miniature dust pre collectors, which can separate respiratory dust and coarse powder dust that are harmful to human health. Its separation efficiency meets the internationally recognized "BMRC" curve standard. The instrument adopts microcomputer chip control technology and is equipped with a high-energy cadmium nickel rechargeable battery. It can run continuously for up to 10 hours on a one-time charge. It is easy to operate, has high timing accuracy, is sturdy and durable, and has convenient and fast timing selection. The countdown time can be freely selected from 0-99 hours and 59 minutes, and the power supply will be automatically turned off when the machine is stopped. It is currently an ideal sampler among similar instruments in China.

Individual Explosion proof Dust Sampler Technologyparameter
Rated flow rate: 2L/min
Sampling flow rate: 0.1~3L/min (adjustable)
Sampling range: total dust and respiratory dust
◆ Flow error: ≤ 5％
◆ Timing range: freely set within 99 hours and 59 minutes
Continuous working time:>8 hours
◆ Timing error: ≤ 1‰
◆ Maximum negative pressure: ≥ 35000pa
Working temperature: 0 ℃~40 ℃
◆ Storage temperature:- 40℃～ 60℃
Environmental atmospheric pressure: 80KPa~110Kpa
Relative humidity: ≤ 95％
Noise: ≤ 60dB
The control button allows for pausing sampling during breaks, meals, or other situations
◆ Anti backflow suction system: It can prevent liquids and particles from being sucked back into the instrument, thereby extending its service life
Explosion proof form: Exib Ⅱ AT3 certificate number: 2094027
Power supply: 10VDC, 220V 50Hz AC
Weight: Approximately 0.5kg