Industrial conductivity meter
LC-3000
Microcomputer based design with easy operation and automatic temperature compensation (10K thermistor) model LC3000 LC3000C LC3000T
Test project |
Specific resistance/conductivity/temperature |
||
Range |
specific resistance |
0.00 MΩ·cm~20.00 MΩ·cm |
|
CONDUCTIVITY |
0.05 μS/cm~200.0 mS/cm |
||
temperature |
0~100.0℃ |
||
resolution |
specific resistance |
0.01 MΩ·cm |
|
CONDUCTIVITY |
0.01 μS/cm |
||
temperature |
0.1 ℃ |
||
accuracy |
specific resistance |
±1%(±1 Digit) |
|
CONDUCTIVITY |
±1%(±1 Digit) |
||
temperature |
±0.2 ℃(±1 Digit) |
||
temperature compensation |
NTC10Kautomatic temperature compensationManual temperature compensation |
||
Correction mode |
Electrode constantcorrect |
||
Ambient Temperature |
0~50 ℃ |
||
storage temperature |
-10~70 ℃ |
||
Electrode coefficient |
Can choose from 0.01, 0.1, 1.0, 10.00 cm-1, 0.08~12.00cm-1adjustable |
||
temperature coefficient |
Linear temperature coefficient compensation(0.00%~40.00%) and nonLinear temperature coefficient compensation |
||
Current output one |
Isolation type 4-20 mA can be set with corresponding measurement range, maximum load 500 Ω |
||
Current output 2 |
Isolation type 4-20 mA can be set with corresponding temperature measurement range, maximum load 500 Ω |
||
control |
Contact output |
RELAY ON/OFFContact point, 250VAC 5A Max |
|
setting |
Two independent control points for high and low points |
||
Protection level |
IP65 |
||
power supply |
100 V~240 VAC±10%,50/60 Hz,5W Max |
||
Local size |
96 mm×96 mm×132 mm(H×W×D) |
||
Hole size |
92 mm×92 mm (H×W) |