LeriskLK-208PTechnical parameters of industrial vacuum cleaner

Eli Lisk LK-208P technical parameters of industrial vacuum cleaner

Characteristics of the LK-208P industrial vacuum cleaner from Lelisk:

The LK-208P machine adopts a vacuum suction motor and is equipped with two motors. It can turn on one motor or both motors simultaneously according to the substance being sucked, and the power can reach 2400W. The switch has a waterproof design and is easy to operate.

2. This machine can vacuum and absorb water, equipped with a suction float. When the water reaches a certain level, the float will measure the water level line and automatically float up. The machine still operates normally, but without suction, it will not cause water to directly enter the motor, providing good protection for the motor.

There is a foot pedal at the back of the LK-208P machine that can control the lifting and lowering of the suction rake. When it is working, step on the foot pedal, and when it is not working, step on the foot pedal. The installation of the push suction rake is relatively simple. After purchasing the machine, follow the steps in the manual to operate it. After installation, push the machine by hand to start vacuuming.
4. This machine is suitable for factory dust removal, workshop dust collection, lathe matching, and machinery factory oil suction. Absorbent substances: dust, particles, sand and gravel, paper scraps, paint, dirt, cutting fluid, glass fragments, rust removal during polishing, equipment matching use, etc.

Eli Lisk LK-208P industrial vacuum cleaner features:

1. LK-208P vacuum cleaner motor is used in this machine. The machine is equipped with two motors. The power can reach 2400W by switching on one motor and two motors at the same time according to the absorbed substance. The switch has waterproof design and simple operation.

2. This machine can absorb water and dust. It is equipped with a water-absorbing float ball. When the water reaches a certain level, the float will measure the water level. The machine will automatically float to the water level. However, without suction, it will not cause water to enter the motor directly, thus playing a very good role in protecting the motor.

3. There is a foot pedal behind the LK-208P machine, which can control the lifting and lowering of the suction rake. When working, the foot pedal is trampled down. When not working, the foot pedal is trampled up. The installation of the push-suction pickup is relatively simple. After purchasing the machine, follow the steps in the instructions. After installation, the machine is pushed by hand. You can take dust when you walk..

4. this machine is suitable for plant dedusting, workshop vacuuming, lathe matching, and machinery plant for oil absorption. Absorbable: dust, granules, sand, paper scraps, paint, dirt, cutting fluid, glass fragments, grinding and rust removal, equipment supporting use, etc.