LeriskLK-308PTechnical parameters of industrial vacuum cleaner

Eli Lisk LK-308P technical parameters of industrial vacuum cleaner

LeriskLK-308PIndustrial vacuum cleaner features:

1.LK-308PThis machine adopts a vacuum suction motor and is equipped with three motors. One or two motors can be turned on according to the substance being sucked, and the power of all three motors can reach3600WThe switch has a waterproof design and is easy to operate.

2.This machine can vacuum and absorb water, equipped with a suction float ball. When the water reaches a certain level, the float will measure the water level line and automatically float up. The machine still operates normally, but without suction, it will not cause water to directly enter the motor, providing good protection for the motor.

3.LK-308PThere is a foot pedal at the back of the machine that can control the lifting and lowering of the suction rake. When working, step on the foot pedal, and when not working, step on the foot pedal. The installation of the push suction rake is also relatively simple. After purchasing the machine, follow the steps in the manual to operate itAfter installation, you can vacuum the machine by pushing it with your hand.
4.This machine is suitable for:Factory dust removal, workshop dust collection, lathe matching, machinery factory oil suction. Absorbent substances: dust, particles, sand and gravel, paper scraps, paint, dirt, cutting fluid, glass fragments, rust removal during polishing, equipment matching use, etc.

Eli Lisk LK-308P industrial vacuum cleaner features:

1. LK-308P vacuum cleaner motor is used in this machine. The machine is equipped with three motors. One or two motors can be switched on according to the absorbed substance. The power of three motors can reach 3600W at the same time. The switch has waterproof design and simple operation.

2. This machine can absorb water and dust. It is equipped with a water-absorbing float ball. When the water reaches a certain level, the float will measure the water level. The machine will automatically float to the water level. However, without suction, it will not cause water to enter the motor directly, thus playing a very good role in protecting the motor.

3. There is a foot pedal behind the LK-308P machine, which can control the lifting and lowering of the suction rake. When working, the foot pedal is trampled down. When not working, the foot pedal is trampled up. The installation of the push-suction pickup is relatively simple. After purchasing the machine, follow the steps in the instructions. The vacuum rake is 50 cm wide. After installation, the hand-pushed machine will be pushed. The 1250px can be sucked up by the device.

4. this machine is suitable for plant dedusting, workshop vacuuming, lathe matching, and machinery plant for oil absorption. Absorbable: dust, granules, sand, paper scraps, paint, dirt, cutting fluid, glass fragments, grinding and rust removal, equipment supporting use, etc.