LeriskLK-308STechnical parameters of industrial vacuum cleaner

Eli Lisk LK-308S technical parameters of industrial vacuum cleaner

Characteristics of the LK-308S industrial vacuum cleaner from Lelisk:

1. LK-308S This machine adopts a vacuum suction motor and is equipped with three motors. One or two motors can be turned on according to the substance being sucked. The power of all three motors can reach 3600W when turned on simultaneously. The switch has a waterproof design and is easy to operate.

2. This machine can vacuum and absorb water, equipped with a suction float. When the water reaches a certain level, the float will measure the water level line and automatically float up. The machine still operates normally, but without suction, it will not cause water to directly enter the motor, providing good protection for the motor.

3. This machine is suitable for factory dust removal, workshop dust collection, lathe matching, and machinery factory oil suction. Absorbent substances: dust, particles, sand and gravel, paper scraps, paint, dirt, cutting fluid, glass fragments, rust removal during polishing, equipment matching use, etc.

Eli Lisk LK-308S industrial vacuum cleaner features:

1. LK-308S vacuum cleaner motor is used in this machine. The machine is equipped with three motors. One or two motors can be switched on according to the absorbed substance. The power of three motors can reach 3600W at the same time. The switch has waterproof design and simple operation.

2. This machine can absorb water and dust. It is equipped with a water-absorbing float ball. When the water reaches a certain level, the float will measure the water level. The machine will automatically float to the water level. However, without suction, it will not cause water to enter the motor directly, thus playing a very good role in protecting the motor.

3. this machine is suitable for plant dedusting, workshop vacuuming, lathe matching, and machinery plant for oil absorption. Absorbable: dust, granules, sand, paper scraps, paint, dirt, cutting fluid, glass fragments, grinding and rust removal, equipment supporting use, etc.