Instrument Introduction:

PID parameters do not require manual adjustment: Whether you are familiar with dynamic testing equipment or not, parameter adjustment is a necessary basic step in system optimization. Using Instron's control software, specialized algorithms enable you to adjust parameters based solely on sample stiffness, quickly, simply, and effectively.

Free software interface: The ElectroPuls system is equipped with an intuitive software interface. You can access the key control functions of the device and check its status at any time, allowing you to start the experiment within seconds.

User interface selection: When computer control and data collection are not required, a hardware control panel can be selected to run basic waveforms simply and quickly, suitable for rapid experimentation.

Dynacell dynamic sensor: improves accuracy and testing efficiency. The patented product Dynacell from Instron can reduce inertia errors caused by fixtures and greatly improve the accuracy of load data across the entire frequency range. High lateral stiffness: Some test components or asymmetric specimens can cause lateral loads, leading to system instability. ElectroPuls has a special actuator cylinder bearing system that maintains the alignment of the loading chain.

Oil free actuator cylinder: Innovative linear motor technology provides clean working conditions without the need for lubricating oil and hydraulic oil.

Corrosion resistant T-shaped groove workbench: Do tests need to be conducted in salt solution? ElectroPuls uses highly corrosion-resistant materials that can withstand the overflow or dripping of salt solutions.

Optical encoder: using a coaxial optical encoder to accurately control displacement, while using another LVDT for setting and rough position control.

Vertical and horizontal installation: Choose any vertical or horizontal installation to meet the needs of the test.

Dynamic testing: The modular testing design function provided by the Wavematrix software package greatly simplifies the setup and working process of dynamic testing.

60mm stroke: meets a wide range of static and dynamic tests without worrying about insufficient stroke.

Wide speed range: The speed range of ElectroPuls is over 100 times larger than that of conventional thread driven equipment.

Main features:

The innovative ElectroPlus electronic universal dynamic and static material testing machine is the most advanced testing system for dynamic and static testing of materials and components, fully electronic and digital, without the need for hydraulic systems and compressed air. ElectroPuls includes advanced electronic control equipment, control software, and the latest experimental technology.

Main parameters:

E1000 type:

Maximum load for dynamic testing:+/ 1000 N

Maximum load for static test:+/ 710 N

Cylinder stroke: 60 mm

Installation: Vertical installation, horizontal installation, desktop installation

E3000 type:

Maximum load for dynamic testing:+/ 3000 N

Maximum load for static test:+/ 2100 N

Cylinder stroke: 60 mm

Installation: Vertical installation, desktop installation

E3000 Pull Twist Dual Axis Type:

Maximum load for dynamic testing:+/ 3000 N

Maximum load for static test:+/ 2100 N

Cylinder stroke: 60 mm

Dynamic capability of torsional load:+/ 25Nm

Twisting ability: maximum+/16 revolutions (continuous rotation of 32 revolutions)

Installation: Vertical installation, desktop installation

E10000 type:

Maximum load for dynamic testing:+/ 10000 N

Maximum load for static test:+/ 7000 N

Cylinder stroke: 60 mm

Installation: Floor standing

E10000 Pull Twist Dual Axis Type:

Maximum load for dynamic testing:+/ 10000N

Maximum load for static test:+/ 7000 N

Cylinder stroke: 60 mm

Torsional load capacity:+/ 100N

Twisting ability: maximum+/16 revolutions (continuous rotation of 32 revolutions)

Installation: Floor standing