1、 Overview

JX200BThe transmitter host is equipped with a standardSType Pitot Tube can measure the flow rate and velocity of high-temperature flue gas.

2、 Functional Features

1Stainless steel pitot tube temperature resistant (850 ℃), standard transmitter host: 4-digit LCD display, zero position adjustable on site, full degree adjustable on site.

2Good stability, with long-term stability of up to 1% FS/year at full and zero positions. The host has a temperature drift of less than 1% FS within the compensation temperature range of 0-70 ℃, and less than 1% FS within the entire allowable operating temperature range.

3Equipped with reverse protection and current limiting protection circuits, the transmitter will not be damaged if the positive and negative poles are reversed during installation. In case of abnormalities, the transmitter will automatically limit the current to within 35mA.

4Solid state structure, no movable parts, high reliability, long service life.

5From wind pressure to steam, high-precision measurements can be made without being affected by the mass of the measured medium.

6Easy to install, simple structure, economical and durable.

3、 Main technical parameters

◎ Pitot tube measuring medium:Gas or liquid compatible with 304 stainless steel.Pitot tubeTechnical Parameter：

◎Main uses of pitot tube:Measure the total pressure, static pressure, dynamic pressure (i.e. pressure difference) inside the pipeline, and also calculate the flow rate and flow rate.

◎Pitot tube instrument connection:Connect to the transmitter host and convert to wind speed.

◎Pitot tube operating temperature:≤600℃
◎Execution standards:National standard JJG518-98
◎Pitot tube usage humidity:≤HR45%
◎Measurement flow rate range:Air flow velocity ≤ 60m/s; Water flow rate ≤ 25m/s
◎Pitot tube standard coefficient:L-type pitot tube is between 0.99 and 1.01; The S-shaped pitot tube is between 0.81 and 0.86.

☆☆Pitot tube structure:The L-shaped standard pitot tube is made up of two concentric tubes with different inner diameters. The straight end tail joint of the inner tube is a full pressure tube, and the side joint of the outer tube is a static pressure tube The S-shaped pitot tube is welded with two pipes of the same diameter, with the full pressure end facing the airflow and the static pressure end facing away from the airflow. The coefficient number and static pressure joint marking number are marked at the joint, and cannot be connected incorrectly during use The side pointing rod is in the same direction as the measuring head, and the direction can be determined during use to ensure that the measuring head is aligned with the incoming flow direction.

1. Stainless steel pitot tube with temperature resistance (450 ℃), standard transmitter host: 4-digit LCD display, zero position adjustable on site, full degree adjustable on site.

2. Good stability, with long-term stability of up to 1% FS/year at full and zero positions. The host has a temperature drift of less than 1% FS within the compensation temperature range of 0-70 ℃, and less than 1% FS within the entire allowable operating temperature range.

3. It has reverse protection and current limiting protection circuits. During installation, reversing the positive and negative poles will not damage the transmitter. In case of abnormalities, the transmitter will automatically limit the current to within 35mA.

Solid state structure, no movable parts, high reliability, long service life.

From wind pressure to steam, high-precision measurements can be made without being affected by the mass of the measured medium.

Easy to install, simple structure, economical and durable.

The JX200B transmitter host, when paired with a standard S-type pitot tube, can measure the flow rate and velocity of high-temperature flue gas

The JX200B transmitter host, when paired with a standard S-type pitot tube, can measure the flow rate and velocity of high-temperature flue gas