Large scale oilfield sludge drying equipmentWedge shaped hollow blades are densely arranged on the hollow shaft, and the heat medium flows through the blades through the hollow shaft. The heat transfer area within a unit effective volume is large, and the temperature of the heat medium ranges from -40 ℃ to 320 ℃. It can be steam or liquid, such as hot water, thermal oil, etc. Indirect conduction heating does not carry away heat with air, and the heat is used to heat the material. The heat loss is only the heat dissipation to the environment through the insulation layer of the device body. The wedge-shaped blade heat transfer surface has self-cleaning function. The relative motion between the material particles and the wedge-shaped surface produces a scrubbing effect, which can wash away the attached material on the wedge-shaped surface and maintain a clean heat transfer surface during operation. The shell of the blade dryer is W-shaped, and generally two to four hollow mixing shafts are arranged inside the shell. The shell has sealed end caps and upper caps to prevent material dust leakage and collect material solvent vapor. Set up a stopper at the discharge port to ensure the height of the material level, so that the heat transfer surface is covered by the material and fully functional. The heat transfer medium flows through the shell jacket and hollow stirring shaft through the rotary joint. The hollow stirring shaft has different internal structures according to the type of heat medium to ensure optimal heat transfer effect. This device can dry wet sludge with 80% moisture content into dry powder with 20% moisture content The sludge drying system operates under full negative pressure Equipped with enhanced heat transfer devices for direct heat transfer Easy control of material drying and moisture content There are few high-temperature mechanical equipment in the system Simple and reliable Low failure rate. This machine can indirectly heat or cool paste, granular, powdered, and slurry materials, and can complete unit operations such as drying, cooling, heating, sterilization, reaction, and low-temperature calcination. The special wedge-shaped stirring heat transfer blade in the equipment has high heat transfer efficiency and self-cleaning function of the heat transfer surface.

Large scale oilfield sludge drying equipment