overview
Ceramic microporous aerators are divided into two types: semi alumina and fully alumina. The semi alumina aerator has the advantages of low consumption, reliable operation, less clogging, low resistance, large inflation volume, and strong agitation. All alumina aerator, alumina aerator cap and tray are combined to form an integrated all alumina aerator. Overcoming the problem of air leakage between the tray and the alumina cap after prolonged use of the semi alumina aerator head.

advantage
The integrated corundum aerator has been designed and manufactured through repeated experiments, which is novel and unique, and has the following advantages:
1. The structure is simple, with only three components in one unit, and the assembly speed is fast, making it easy to install and debug at the bottom of the pool.
2. Good sealing performance, preventing loose contact between different materials and causing air leakage.
3. The surface area is large, and it has been calculated that an increase of nearly 75% in surface area also increases the aeration rate, improves oxygenation efficiency, or expands the service area. The service area of the integrated aerator is twice that of semi alumina.
4. Good aeration and agitation performance. The original aerator only had positive aeration, while the integrated aerator aerates both sides simultaneously, making it easier for the sewage at the bottom of the tank to be stirred and pushed upwards.

Advantages of alumina aerator
1. Low energy consumption: average normal working gas volume of 2-4m³/H.
2. High oxygenation efficiency: Dissolved oxygen at a depth of 6 meters (2m)³/h) 41.53%.
3. Reasonable structure: no tray, no leakage, no future problems, easy installation and debugging, simple operation.
4. Strong adaptability: suitable for intermittent aeration and continuous aeration, that is, arched upward during continuous aeration and arched downward during intermittent aeration, without blockage.
5. Reasonable ratio: Natural ore is carefully selected through ball milling and sintered at a high temperature of 1268 degrees Celsius to form accurate density control and fully form good curved linear pores. Ensure low resistance and high dissolved oxygen.
6. Complete supporting facilities: equipped with acid washing system, the product has a pH resistance of 99.9%.
7. Long service life: With proper maintenance, the normal service life is over 15 years.
8. Low operating costs: saving energy consumption by 46%.
9. Service area: 0 7m per piece²-1.0m²/One.