VIP member
Japan KYOWA accelerometer sensor
Japan KYOWA accelerometer AS-GA AS-GB ASH-A AS-TG ASHT-A
Product details
Japan KYOWA accelerometer sensor
Product images | Model name | summary |
---|---|---|
![]() |
AS-GA Small Low Capacity Acceleration Sensor |
Strain gauge oil damping small low capacity accelerometer. The cable can be disassembled through sealed terminals. Rated capacity: ± 9.807 to ± 196.1m/s2 Size: 14 × 18 × 14mm Rated output: 0.5mV/V or above Frequency response range: DC~(40~250)Hz |
![]() |
AS-GB Small Low Capacity Acceleration Sensor |
Strain gauge oil damping small low capacity accelerometer. The cable is directly led out from the host. Rated capacity: ± 9.807 to ± 196.1m/s2 Size: 14 × 20 × 14mm Rated output: 0.5mV/V or above Frequency response range: DC~(40~250)Hz |
![]() |
ASH-A High response small accelerometer sensor |
Strain gauge oil damping type small high-capacity accelerometer with high response. Rated capacity: ± 98.07 to ± 9807m/s2 Size: 16 × 16.5 × 16mm (ASH-A-10~50) 15.2×15.5×14mm(ASH-A-100~1K) Rated output: 0.5mV/V ± 20% (ASH-A-10 is 0.5mV/V ± 25%) |
![]() |
AS-TG Small 3-axis accelerometer sensor |
An oil damping small 3-axis acceleration sensor that can measure the acceleration generated in the front back, left and right, and up and down directions. The mutual interference between each axis is small, allowing for high-precision measurement. Rated capacity: ± 9.807 to ± 196.1m/s2 Size: 44 × 20 × 44mm Rated output: 0.5mV/V or above Frequency response range: DC~(40~250)Hz |
![]() |
ASHT-A 3-axis acceleration sensor |
Small and lightweight oil damping 3-axis acceleration sensor. The mutual interference between each axis is small, allowing for high-precision measurements. Rated capacity: ± 980.7 to ± 9807m/s2 Rated output: 0.5mV/V (± 20% to ± 25%) |
![]() |
ASW-A Waterproof accelerometer |
A waterproof oil damping accelerometer with a water resistance of 490kPa Rated capacity: ± 9.807 to ± 196.1m/s2 Size: 18 × 18 × 24mm Rated output: 0.5mV/V or above Frequency response range: DC~(40~250)Hz |
![]() |
ASQ-D Servo type accelerometer |
An acceleration sensor that can measure small vibrations with high precision and sensitivity through a servo device. The measurement of this device requires the use of a dedicated signal amplifier VAQ-700A. Rated capacity: ± 9.807 to ± 49.03m/s2 Size: 32.5 × 75 × 32.5mm Rated output: ± 5V (10V) ± 5% Frequency response range: DC~100Hz |
![]() |
ASPA-A Amplifier with built-in piezoelectric accelerometer |
The amplifier with built-in piezoelectric accelerometer has a wide measurement range and can measure from weak vibrations to large accelerations. Can perform high-sensitivity measurements. Acceleration used: ± 2200m/s2 Size: φ 7.8 × 15.7 × Hex7mm Voltage sensitivity: 1.0mV/m/s2±10% Power supply: 15-25VDC, 0.5~5.0mA |
![]() |
ASPB-A Amplifier with built-in piezoelectric accelerometer |
The amplifier with built-in piezoelectric accelerometer has a wide measurement range and can measure from weak vibrations to large accelerations. Can perform high-sensitivity measurements. Acceleration used: ± 2200m/s2 Size: φ 8.5 × 11.5 × Hex9mm Voltage sensitivity: 1.0mV/m/s2±10% Power supply: 15-25VDC, 0.5~5.0mA |
![]() |
ASPC-A Amplifier with built-in piezoelectric accelerometer |
The amplifier with built-in piezoelectric accelerometer has a wide measurement range and can measure from weak vibrations to large accelerations. Can perform high-sensitivity measurements. Acceleration used: ± 400 to ± 3600m/s2 Size: 14.2 × 14.2 × 23.7mm Voltage sensitivity: 1.0-10mV/s2±10% Power supply: 21-24VDC, 0.5~10mA |
![]() |
ASPD-A Amplifier with built-in piezoelectric accelerometer |
A small 3-axis amplifier with built-in piezoelectric accelerometer that can measure from weak vibrations to large accelerations, with a wide measurement range. High measurement sensitivity. Acceleration used: ± 450 to ± 4500m/s2 Size: 10 × 10 × 10mm Voltage sensitivity: 1.0-10mV/s2±10% Power Supply: DC 21~30V, 2~10mA |
![]() |
AMAS-A Small accelerometer sensor |
Small and sturdy acceleration sensor Rated capacity: ± 980.7 to ± 1961m/s2 Dimensions: 15 × 6.3 × 11mm Rated output: 2 V ± 20% Response frequency range: DC~2kHz |
![]() |
AMA-A Small 3-axis accelerometer sensor |
Small and lightweight 3-axis acceleration sensor. Can correspond to significant overload. Rated capacity: ± 19.61 to ± 1961 m/s2 Size: 10 × 5.8 × 14mm (± 19.61, ±49.03m/s2), 11×6.5×15mm(±98.07m/s2), 19.3 × 11 × 11 mm (±980.7 m/s2, ±1961 m/s2) Rated output: ± 2V ± 0.2V Frequency response range: DC to 500Hz (± 19.61, ±49.03, ±980.7, ±1961m/s2), DC~200Hz(±98.07m/s2) Safe overload: ± 19613m/s2(±19.61, ±49.03m/s2), ±9807m/s2(±98.07), ±39227m/s2(±980.7, ±1961m/s2) |
![]() |
GSAT-A-900 3-axis gyroscope sensor |
A small and lightweight gyroscope sensor that can measure angular velocity in three directions simultaneously. Rated capacity: ± 900deg/s (± 15.708rad/s) Size: 10 × 8 × 20mm Rated output: approximately ± 2V Recommended excitation voltage: DC ± 2.5-5.0V (when using dual power supply) Allowable impact load: 9807m/s2 |
![]() |
ASD-B Small accelerometer for car collision testing |
The core of the sensor adopts a small, lightweight, and undamped accelerometer with jet strain gauges. The sensitivity direction is divided into two types: horizontal (ASD-B-1KH/2KH) and vertical (ASD-B-1KV/2KV). Rated capacity: ± 9807 to ± 19613m/s2 Size: 10 × 4.7 × 12.5mm Rated output: 1.2mV/V or above Frequency response range: DC~4kHz (sensitivity deviation ± 5%) (23 ℃) |
![]() |
ASDE-A-1K Damping type acceleration sensor for automobile collision testimplement |
An oil damping accelerometer with minimal resonance effect caused by collision acceleration. Can be set in narrow measurement areas. Rated capacity: ± 980.7 to ± 9807m/s2 Size: 10 × 4.9 × 13.5mm Rated output: 1mV/V or above Frequency response range: DC~1kHz (sensitivity deviation ± 3%), 1kHz~4kHz (sensitivity deviation ± 10%) (23 ℃) |
![]() |
ASDH-A Small accelerometer for car collision testing |
The core of the sensor adopts a small, lightweight, and undamped accelerometer with jet strain gauges. Suitable for measuring the acceleration of the vehicle body and dummy during a car collision. The sensitivity direction is divided into two types: horizontal (ASDH-A-1KH/2KH) and vertical (ASDH-A-1KV/2KV). Rated capacity: ± 9807 to ± 19613m/s2 Size: 10 × 4.7 × 12.5mm Rated output: 1.2mV/V or above Frequency response range: DC~4kHz (sensitivity deviation ± 5%) (23 ℃) |
![]() |
ASDR-A-1K Damping type acceleration sensor for automobile collision testimplement |
Due to the use of damping type, the resonance effect caused by collision acceleration is minimal. Rated capacity: ± 9807m/s2 Size: 5.4 × 5 × 13mm Rated output: 2mV/V or above Frequency response range: DC~1kHz (sensitivity deviation ± 3%), 1kHz~4kHz (sensitivity deviation ± 10%) (23 ℃) |
![]() |
ASE-A Small accelerometer for car collision testing |
Measure the acceleration of the vehicle body, components, and dummy Rated capacity: ± 980.7 to ± 9807m/s2 Size: 10 × 5 × 10mm Rated output: 0.5mV/V or above (± 980.7m/s)2), 1mV/V or above (± 4903m/s)2), 2mV/V or above (± 9807ms/s)2) Frequency response range (23 ℃): DC~1kHz (sensitivity deviation ± 3%), 1kHz~2kHz (sensitivity deviation ± 10%) (± 980.7m/s)2), DC~1kHz (sensitivity deviation ± 3%), 1kHz~4kHz (sensitivity deviation ± 10%) (± 4903m/s)2), DC~1kHz (sensitivity deviation ± 3%), 1kHz~4kHz (sensitivity deviation ± 10%) (± 9807m/s)2) |
![]() |
ASER-A Small accelerometer for car collision testing |
Measure the acceleration of the vehicle body and dummy Rated capacity: ± 980.7 to ± 9807m/s2 Size: 10 × 5 × 10mm Rated output: 0.5mV/V or above (± 980.7m/s)2), 1mV/V or above (± 4903m/s)2), 2mV/V or above (± 9807ms/s)2) Frequency response range (23 ℃): DC~1kHz (sensitivity deviation ± 3%) · 1kHz~2kHz (sensitivity deviation ± 10%) (± 980.7m/s)2), DC~1kHz (sensitivity deviation ± 3%) · 1kHz~4kHz (sensitivity deviation ± 10%) (± 4903m/s)2), DC~1kHz (sensitivity deviation ± 3%) · 1kHz~4kHz (sensitivity deviation ± 10%) (± 9807m/s)2) |
![]() |
ASM-1KBCH M3 Semiconductor based miniature accelerometer |
A small and lightweight accelerometer using semiconductor strain gauges in the sensing core, which can be applied to vehicle acceleration measurement in collision tests. The sensitivity direction is horizontal to the installation surface direction. Rated capacity: ± 9807m/s2 Size: 12 × 5.4 × 25mm Rated output: 1.75mV/V or above Frequency response range: DC~2.8kHz (sensitivity deviation ± 5%) (23 ℃) |
![]() |
ASM-1KBCV M3 Semiconductor based miniature accelerometer |
A small and lightweight accelerometer using semiconductor strain gauges in the sensing core, which can be applied to vehicle acceleration measurement in collision tests. The sensitivity direction is perpendicular to the installation surface direction. Rated capacity: ± 9807m/s2 Size: 12 × 5.4 × 25mm Rated output: 1.75mV/V or above Frequency response range: DC~2.8kHz (sensitivity deviation ± 5%) (23 ℃) |
![]() |
ASM-A-ID Semiconductor based miniature accelerometer |
A small and lightweight accelerometer using semiconductor strain gauges in the sensing core, which can be applied to vehicle acceleration measurement in collision tests. Rated capacity: ± 19613m/s2 Size: 12 × 5.4 × 25mm Rated output: 6mV/V or above Frequency response range: DC~2.8kHz (sensitivity deviation ± 5%) |
![]() |
ASM-1KCBV Semiconductor based miniature accelerometer |
A small and lightweight accelerometer using semiconductor strain gauges in the sensing core can be applied for acceleration and vibration measurement in automotive collision tests, as it rarely affects the vibration mode of the measured object. Rated capacity: ± 9807m/s2 Size: 16 × 7.7 × 12.5mm Rated output: 1.5mV/V or above Frequency response range: DC~3.5kHz (sensitivity deviation ± 5%) (23 ℃) |
![]() |
ASM-200BA Semiconductor based miniature accelerometer |
The use of semiconductor acceleration sensors in the sensing core has minimal impact on the vibration of the measured object due to its small and lightweight design, making it a suitable sensor for measuring acceleration and vibration in automotive collision tests and other applications. Rated capacity: 1961m/s2 Size: 7.6 × 4.6 × 15mm Rated output: 1.3mV/V or above Frequency response range: DC~3.5kHz (sensitivity deviation ± 5%) (23 ℃) |
Online inquiry